Ben, One option for you is to just order from Lionel. The Illustrated Parts Breakdown (IPB) and almost all of the parts for the SD70ACe are now listed and available per Lionel's web site. Go to the full Lionel web site (not the mobile site), look under Customer Service / Replacement Parts and then search based on the product model number of the SD70ACe (suspect it is 6-425??).
Regards Michael Greene Sent from my iPad On Mar 8, 2013, at 11:25 AM, "pickycat95" <[email protected]> wrote: > As is sometimes typical, I took one step backwards before making any progress > on installing KD802s on my new SD70ACe. That was I ground the philips head > out of the top of the one of the bracket mounting screws. It got more > involved after that when I realized the instructions do not tell you how to > fix the pilot to the frame. Accomplishing that revealed that the frame was > not mounted square to the shell because there is a little extra glob where > the wiring for the left ditch light enters into the innards. So now I need > to take the entire shell off to remove the glob. > > So now I'm about 5 steps backwards and the problem remains that I have a lame > loose screw and need to find a replacement. Is there a good source for these > tiny machine thread screws? > Ben Trousdale > > > > ------------------------------------ > > Yahoo! Groups Links > > > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
