I've never heard of that throttle. Prevoius discussion on this list suggested that they will not work on DC with pulse. I also don't know what that means. I got mine to work forwards and backwards in AC mode, but only one direction in DC mode. The reverse switch on the transformer only caused it to not move. This was all done when I was having trouble getting it to work in DCC to see if the motors worked. Some helpful suggestions from members on this list cleared up the DCC issue and there's been no looking back. Ben Trousdale
--- In [email protected], sscale@... wrote: > > > > Has anyone else tried to run these using the old > "NASG module" throttles? (Yes, I know I have to get with the > 21st century one of these days.)Apart from the (annoying) sound effects, they > pretty much > only want to run in reverse, though if I do a few quick throttle & > direction manipulations, I can get forward motion.I assume this has to do with > the DC waveform. When I scoped these throttles years ago, they appeared to > start out with half-wave power, and then gradually filled in the gaps as > the throttle setting increased.Stan Stokrocki > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
