Sorry Robert. You have no idea how much I dreaded the thought of having to do what I described below. Especially because I have just been asked to add about another 200 checks to SA.
:-) -----Original Message----- From: Bell, Robert [mailto:[EMAIL PROTECTED] Sent: Tuesday, June 17, 2003 1:00 PM To: [EMAIL PROTECTED] Subject: RE: [SA-list] Hmmm Calm down, Corey. You just triggered my spam filter's first false positive. http://spambayes.sourceforge.net/ > -----Original Message----- > From: Corey Horton [mailto:[EMAIL PROTECTED] > Sent: Tuesday, June 17, 2003 12:56 pm > To: [EMAIL PROTECTED] > Subject: RE: [SA-list] Hmmm > > > Wooo Hooo!!!!! NOW THAT IS SERVICE!!!!!!!!!!!! > > THANK YOU SOOOO MUCH!!!! Today, I was just about to begin the > tedious task of implementing one of the solutions that was > suggested earlier, by John Rosiak (thanx again John). That > is, to create a second alert for each existing alert that > depends on the existing alert being down and to trigger the > second alert every X cycles. This solution worked perfectly, > as John described it. However, it is a lot of extra work and > also uses up twice as many entries. I've been holding off on > this and today, I returned to the list (been a little busy > the past few days) to find my prayers answered. MUCH OBLIGED!!! > > -----Original Message----- > From: Jason Passow [mailto:[EMAIL PROTECTED] > Sent: Monday, June 16, 2003 10:53 AM > To: [EMAIL PROTECTED] > Subject: RE: [SA-list] Hmmm > > > Thank you very very much. > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Sent: Monday, June 16, 2003 7:12 AM > To: [EMAIL PROTECTED] > Subject: RE: [SA-list] Hmmm > > Just added the following that could help: > > > It's now possible to send the alert when a times down > and all b follow up down cycles > > Example: > > a=2 and b=3 > > cycle 2,5,8,... will get the alert > > > http://www.woodstone.nu/soft/beta/salive4.exe (v4.0.1438 or > more recent) > > > dirk. > > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Sent: Fri Jun 13 6:06 PM > To: [EMAIL PROTECTED] > Subject: RE: [SA-list] Hmmm > > > Also we're looking at it if we can add what Jason suggested. > > > > dirk. > > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Behalf Of Corey Horton > Sent: Fri Jun 13 6:00 PM > To: [EMAIL PROTECTED] > Subject: RE: [SA-list] Hmmm > > > Ah ha! Now I knew someone out there had figured this out! > > Thanx to all who responded. This forum is truly the best tech > support I've ever seen for a product... > > -----Original Message----- > From: Rosiak, John [mailto:[EMAIL PROTECTED] > Sent: Friday, June 13, 2003 11:41 AM > To: '[EMAIL PROTECTED]' > Subject: RE: [SA-list] Hmmm > > > Corey and Jason, > > One other alternative is to perform the same check as machine > down with a dependency on that check being down, e.g. > Machine 1 - down -- alert on 1st down (and back up too) > Machine 1 down (depends on previous entry being down) > -- alert on 29th down (equates to 60 minutes on a 2 min. check) > > Good luck, > John > -----Original Message----- > From: Jason Passow [mailto:[EMAIL PROTECTED] > Sent: Friday, June 13, 2003 11:18 AM > To: [EMAIL PROTECTED] > Subject: RE: [SA-list] Hmmm > > > Corey I just sent a similar thread. How I accomplish this > currently is one alert to alert when down 1 time (you can say > two or three or > whatever) and then another identical alert to alert me every > _ down cycles. Hopefully Dirk will take both of our emails > and add an option for "When _ times down and every _ down > cycles thereafter. " This is reworded from my previous > email. I realized that I may not want to know the first time > down (false positives etc) but perhaps 2 or three and every > 10 after that. With multiple admins on our network it might > get fixed before I am in a position to do something about it. > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Corey Horton > > Sent: Friday, June 13, 2003 10:09 AM > To: [EMAIL PROTECTED] > Subject: [SA-list] Hmmm > > I would like Servers Alive to run on a 2-minute check cycle. > That is, run through it's checks every 2 minutes. If a > machine is down, I'd like to be alerted immediately, and then > every hour afterwards, until the machine is back up. Right > now, I'm getting paged every 2 minutes. > > I don't really want to go to the "When _ Times Down and All > Next Down Cycles" because it forces me to wait until I'm > initially alerted (hope this makes sense). > > Using the alert choices, how can I accomplish this? > > ---------------------------------- > Corey M. Horton, Consultant > ISG Solutions > 2400 Research Boulevard > Suite 350 > Rockville, Maryland 20850 > 301.519.3776 > [EMAIL PROTECTED] > > To unsubscribe from a list, send a mail message to > [EMAIL PROTECTED] With the following in the body of the message: > unsubscribe SAlive > > To unsubscribe from a list, send a mail message to > [EMAIL PROTECTED] With the following in the body of the message: > unsubscribe SAlive > To unsubscribe from a list, send a mail message to > [EMAIL PROTECTED] With the following in the body of the message: > unsubscribe SAlive > To unsubscribe from a list, send a mail message to > [EMAIL PROTECTED] With the following in the body of the message: > unsubscribe SAlive > > To unsubscribe from a list, send a mail message to > [EMAIL PROTECTED] With the following in the body of the message: > unsubscribe SAlive > To unsubscribe from a list, send a mail message to > [EMAIL PROTECTED] With the following in the body of the message: > unsubscribe SAlive > To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive
