At 05:21 PM 9/30/03 +0200, you wrote: >The biggest problem with having 2 version on the same system is that not all >DLL/OCX files are compatible with each other. >So if it will work is not sure. > >As for the other question, I don't understand what the "batch file" is doing >in the "story". > The batch file (I have 2 of them) (1) does a release/renew so I get an IP address from the modem connection and it relases the cable ip. The other does the same thing but so I get an ip from the cable and not from the modem..
> > >I'm a registered user of Salive version 3. (I know I need to upgrade, will >soon). >I have it running on a 2000 server. So far so good. Can I install version 4 >(in a different directory) along with version 3, or do I have to uninstall >version 3 first?? > >Also I have a dial-up account & cable account. On I pc I have (2) nics. >What I do is when the pc boots it does a release/renew, so it's connected >to the cable. When I need to use the dial-up, I have a batch file that will >switch from cable ip to modem ip address. I also have (1) to switch the >other way. What I was wondering is??? I only use the dial-up for a 1/2 >hour or so. Can I have Salive check (ping) the cable ip, it's always the >same, and then an hour from the time that it failed (as I'm not on dial-up >that long) have Salive run a batch file that will switch it back to cable? > >Thanks >Regards, > >Gene > [EMAIL PROTECTED] > http://www.eclipse.net/~njkat >To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] >With the following in the body of the message: > unsubscribe SAlive > > > >To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] >With the following in the body of the message: > unsubscribe SAlive > > Regards, Gene [EMAIL PROTECTED] http://www.eclipse.net/~njkat To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive
