I run a batch file to transmogrify some of the data after the interchange file has been written. It works on the XP Box.
Mike >>> [EMAIL PROTECTED] 12/16/03 12:32PM >>> What batch file are you talking about? Dirk. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michael Shook Sent: Tuesday, December 16, 2003 5:48 PM To: [EMAIL PROTECTED] Subject: [SA-list] Continuing saga of a moved install... I'm now to the point of turning on the database updates, but while a interchange file is created and the DB is updated, the batch file I run will not run. I've tried to change it to a different batch file, it still doesn't work. Any ideas? Here's the last check and the next two lines from the log file: Tuesday, December 16, 2003 11:36:05 AM Harpo Tuesday, December 16, 2003 11:36:06 AM Harpo OK with a successrate of 100% and an average roundtriptime of 96.8ms Tuesday, December 16, 2003 11:36:06 AM Generating interchange file (C:\Program Files\Salive\DataStore\SALastCycle.txt- 85) Tuesday, December 16, 2003 11:41:07 AM Check cycle starts ( 10- 10) Michael Shook Technical Support Analyst - Corporate Saddle Creek Corporation 723 Joe Tamplin Industrial Blvd Macon GA 31217 478 742 8740 ext. 105 (work) 478 256 9318 (mobile) 478 742 7917 (fax) [EMAIL PROTECTED] http://www.saddlecrk.com To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive
