You need to purchase and install a "UPS Network Management Card" to get the indepth SNMP queries. Contact your APC rep/salesman to get the correct card. This card will then enable the UPS to be controlled and report via a LAN connection.
Here's a page on APC's website with some more info: http://www.apc.com/products/family/index.cfm?id=98&tab=models Michael Shook Technical Analyst Saddle Creek Corporation 723 Joe Tamplin Industrial Blvd Macon GA 31217 478 742 8740 ext. 105 (work) 478 256 9318 (mobile) 478 742 7917 (fax) [EMAIL PROTECTED] http://www.saddlecrk.com >>> [EMAIL PROTECTED] 04/21/04 09:16AM >>> Hi, Have u connected it via serial port or ethernet and how are you gathering statistics. We have a whole stack of APC matrix 5000VA but no ethernet connections. Any ideas, Azhar Siddiq "Turner, Peter" <[EMAIL PROTECTED]> Sent by: [EMAIL PROTECTED] 04/21/2004 05:09 PM Please respond to [EMAIL PROTECTED] To <[EMAIL PROTECTED]> cc Subject RE: [SA-list] Any way to monitor UPS /power failure with SAlive I use the following for my APC RM 3000s Red is SNMP ID; Magenta is returned value. 230 UPS ED Input voltage 172.16.30.94 (SNMP 1.3.6.1.4.1.318.1.1.1.3.2.1.0 ) - 0 124-100.% 4:18:14 PM, 4/20/04 230 UPS ED Load percent 172.16.30.94 (SNMP 1.3.6.1.4.1.318.1.1.1.4.2.3.0) - 0 14-100.% 4:18:14 PM, 4/20/04 230 UPS ED Load in amps 172.16.30.94 (SNMP 1.3.6.1.4.1.318.1.1.1.4.2.4.0) - 0 3-100.% 4:18:14 PM, 4/20/04 230 UPS ED Not on line 172.16.30.94 (SNMP 1.3.6.1.4.1.318.1.1.1.4.1.1.0) - 16 2-96.02% 6:54:11 AM, 4/21/04 -----Original Message----- From: Azhar Siddiq [mailto:[EMAIL PROTECTED] Sent: Wednesday, April 21, 2004 6:21 AM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: [SA-list] Any way to monitor UPS /power failure with SAlive hi all,is ther any way to montir APC UPS with salive , I want to detect power failure and monitor load on UPS . Rgds Azhar --- [This E-mail scanned for viruses by Declude Virus] To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive
