Hello Dirk, Ok I will try and report back.
Barry Monday, February 6, 2006, 11:16:00 AM, you wrote: DB> I read (but did NOT test this) that it should be possible to check an DB> Asterisk box via a TCP (or UDP that wasn't clear) protocol DB> Packet to receive on connect DB> (x) anything DB> Packet to send on connect: DB> REGISTER DB> Packet to receive as response: DB> (x) contains DB> 200 OK DB> port 5600 DB> BUT as said I did NOT tested this! DB> What you could do is using a sniffer to see how a "client" communicates with DB> the Asterisk box. On DB> http://www.woodstone.nu/salive/create_protocol_01.asp DB> there is some generic info on how do create a TCP protocol under Servers DB> Alive. DB> If you get it to work then please keep us updated on how you did it. DB> Dirk. DB> -----Original Message----- DB> From: [EMAIL PROTECTED] DB> [mailto:[EMAIL PROTECTED] On Behalf DB> Of Barry at Mutual Data DB> Sent: Monday, February 06, 2006 5:07 PM DB> To: [email protected] DB> Subject: [SA-list] Asterisk monitoring? DB> Hello salive, DB> Anyone set up Servers Alive to monitor an Asterisk box? DB> Any pointers? -- Best regards, Barry mailto:[EMAIL PROTECTED] To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive
