Thanks for the help. Worked on one Server, which the UPS was connected with a USB cable. The other, an old server, the UPS unit is connected with a Serial(9pin) cable and that one gives and error when testing. Both are running the same version of APC and run Windows 2000 Server.
Frank Brower Network Administrator Olson Research Group 300 Phillips Blvd. Suite 100 Ewing, NJ 08618 609-882-9888 Fax: 609-359-2003 -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Michael Shook Sent: Monday, May 14, 2007 11:31 AM To: Servers Alive Discussion List Subject: RE: [SA-list] Monitoring UPS This assumes that you have a network management card installed. If the back of your UPS has a black metal plate with no markings, you need to install a AP9617, AP9618 or AP9619 network amangement card. Michael D. Shook Systems Analyst - Data Integration Saddle Creek Corporation [EMAIL PROTECTED] 863 668 4477 (work) 863 665 1261 (fax) www.saddlecrk.com -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Dirk Bulinckx Sent: Monday, May 14, 2007 11:26 AM To: Servers Alive Discussion List Subject: RE: [SA-list] Monitoring UPS Have a look at http://archive.woodstone.nu/retrievemsg.asp?ID=13761 Dirk Bulinckx. -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Frank Brower Sent: Monday, May 14, 2007 5:21 PM To: Servers Alive Discussion List Subject: [SA-list] Monitoring UPS I know this was talked about before, but forget what came of it. I would like to monitor my APC UPS Units with ServersAlive. They are a SmartUPS1400 and SMartUPS 1500 models. I have the standard v6 beta of SA. Frank Brower Network Administrator Olson Research Group 300 Phillips Blvd. Suite 100 Ewing, NJ 08618 609-882-9888 Fax: 609-359-2003 -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Kevin Stone Sent: Monday, May 14, 2007 11:11 AM To: Servers Alive Discussion List Subject: Re: [SA-list] Change % var is the alert I would go with the tags as they are not limited in number, self describing, and would provide more flexibility. -Kevin Dirk Bulinckx wrote: > Currently within the alerts you can use the % parameters. They are > "limited" to one-char after the %, which means that basicly we have > %0 .. %9 and %a ... %z > That's 36 possibilities. > > We would like to change this so that we have more possible parameters. > One of the options is to use the current HTML tags for this, another > option would be to use %name% as parameters, or ... (other ideas?) > > My idea is that as the HTML tags are already known that it's more > logical to use them to within the alerts. > > All remarks/options/questions/...are more then welcome. > > (when we change to another type of parameters we will OFCOURSE convert > the parameters in the existing alerts to the new parameters). > > Dirk Bulinckx. > > To unsubscribe send a message with UNSUBSCRIBE as subject to > [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. > To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. -------------------------------------- The information contained in this message is intended only for the use of the addressee. If the reader of this message is not the intended recipient or agent of the intended recipient, you are hereby notified that any dissemination, distribution, or copying of the message is strictly prohibited. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list.
