You could build a cascade of checks with the alert on the bottom.
Michael D. Shook Systems Analyst - Data Integration Saddle Creek Corporation 863 668 4477 (work) 863 665 1261 (fax) My time zone: UTC -0400 (Eastern Daylight Time) -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of GLENN GASPAR Sent: Wednesday, October 03, 2007 4:26 PM To: Servers Alive Discussion List Subject: [SA-list] SNMP checks - limited to 2 values per entry? Hello, We're currently using version 6.0.2056. Is there any way to do an SNMP check so that it can compare more than 2 values in one single check? (ie Controller battery 1 -OK, 9- High, 12 - Charging, 36 -Learning) We don't want to generate any alert if it has any of these values. Thanks, Glenn To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. -------------------------------------- The information contained in this message is intended only for the use of the addressee. If the reader of this message is not the intended recipient or agent of the intended recipient, you are hereby notified that any dissemination, distribution, or copying of the message is strictly prohibited. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list.
