When I run it as a service with local system account and set it to interact with desktop all of the checks which require authentication fail. I have configured them to authenticate before checking and have double checked the credentials and the checks still fail.
Jason Passow Network Administrator Mississippi Welders Supply http://www.mwsco.com [email protected] ph: (507) 494-5178 fax: (507) 454-8104 -------------------------------------------------------------------------------- From: Phil Williams [mailto:[email protected]] To: Servers Alive Discussion List [mailto:[email protected]] Sent: Fri, 11 Feb 2011 12:45:13 -0600 Subject: Re: [SA-list] Servers Alive & Windows 2008 ----- Original Message ----- From: Servers Alive Discussion List <[email protected] (mailto:[email protected])> To: Servers Alive Discussion List <[email protected] (mailto:[email protected])> Sent: Fri Feb 11 17:30:35 2011 Subject: Re: [SA-list] Servers Alive & Windows 2008 I'm running it on W2k8 r2 as an app without to much of a problem. Occasionally it seems to wig out on a check and exiting Servers Alive and starting it again does not fix the problem I have to re-boot the server. Brian Patow Network Administrator/Engineer Triumph Structures - Everett A Triumph Group Company 1415 75th St. SW Everett, WA 98203 Phone: (425) 438-7111 [email protected] (mailto:[email protected]) http://www.triumphgroup.com (http://www.triumphgroup.com) -------------------------------------------------- From: "Dirk Bulinckx" <[email protected] (mailto:[email protected])> Sent: Friday, February 11, 2011 1:38 AM To: "Servers Alive Discussion List" <[email protected] (mailto:[email protected])> Subject: [SA-list] Servers Alive & Windows 2008 > We received some remarks from users that Servers Alive was not able to run > on > Windows 2008. > We would like to get some additional info on this. > We did some testing and it seems to run as service (and be able to do > checks too > :-)).... > There are indeed some issues with for example the GROUPS that aren't > loaded/saved correctly due to the location of the GROUPS.GRP file. > > > > > dirk > > To unsubscribe send a message with UNSUBSCRIBE in the subject line to > [email protected] (mailto:[email protected]) > If you use auto-responders (like out-of-the-office messages), make sure > that they are not sent to the list nor to individual members. Doing so > will cause you to be automatically removed from the list. > > To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] (mailto:[email protected]) If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. This email and any attachments are confidential and are for the attention of the addressee only. If you are not one of the intended recipients please notify the sender and delete the email including any attachments forthwith. You are further requested not to disclose or distribute any of the contents to any other person. Any personal views or opinions are solely those of the author and do not represent the view of SilverBug in any way whatsoever. SilverBug does not guarantee that the integrity of this communication has been maintained nor that the communication is free of viruses, interceptions or interference. By communicating with anyone at SilverBug by email, you consent to the monitoring or interception of such email by SilverBug in accordance with its internal policies. Unless otherwise stated, any pricing or other information given in this message is indicative only and is subject to change and does not obligate SilverBug in any way whatsoever. SilverBug Limited whose company registration No. is 4541846 and whose registered address is 5 Joplin Court, Presley Way, Crownhill, Milton Keynes, MK8 OJP. To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] (mailto:[email protected]) If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list.
