Apacer > -----Oorspronkelijk bericht----- > Van: Edwin Blink [mailto:[EMAIL PROTECTED] > Verzonden: zaterdag 29 mei 2004 13:15 > Aan: [EMAIL PROTECTED] > Onderwerp: CF > > > As some already saw in the Urmond pictures. I made a couple of > CF to IDE adapters using PCMCIA (or PC card) adapters. > it features a Master/slave jumper and a Blue LED > > for a better look (copy all text between the whitespace to > your browser): > > http://home.wanadoo.nl/edwin.blink/samcoupe/hardware/cf/IDE-PC MCIA-CF%20adapter.jpg
On the Urmond meeting I tested a couple of CF cards hooked up as a slave device to my 450Mb Quantum Fireball and using B-DOS. As the test I put a test pattern on screen and I saved thescreen, reloaded it and repeated the save/loading continuesly for a minute or so. If there was a read write error it would show up immediately. for the save/loading I used READ AT and WRITE AT commands. It worked just fine with 4Mb (sUndisk) cards and a 64Mb card (Benjamin what was the Brand?) But did not work with a 16Mb Transcend card. Also a 128Mb sAndisk did not work 100% reliable. I will look into this 'unreliable' furter and see if it is a software or hardware issue. I know a couple of you already use CF using Collins CF adapter and I'm wondering which tests where made to test a cards compatibility and if the card was tested as a single IDE master device or a master/slave configuration. Edwin ---- This message is confidential and may be privileged. Any review, retransmission, dissemination or other use of, or taking any action with reference to this information by persons other than the intended recipient is prohibited. If you received this message in error, please notify the sender by reply e-mail and delete this message from all computers. Please note that e-mails are susceptible to change. The sender will not accept liability for the improper or incomplete transmission of the information contained in this message.
