manual makes no mention of being able to use a line interrupt to run a routine function or procedure so i guess turning the screen offnis not poss i was hoping the atom lite might stand a chance if i figured out how to chop the screen$ into ½ screens though i would have needed tops and bottoms then she maybe could load 12KB in stead of full 24KB and would have upped the frame rate a bit especially if teh screen was switched off for a½ the asic waits sates too instead of just loading half the screen - was going to try to use cyberlink power director or intervideo wincoder winproducer though i still have no software for teh msi nvidia fx5900zt vtd 128 VIVO despite having asked a few times over the past few years - mind you the drivers on their site are still as reliable as pouring a hot cup of coffee in the power supply(DO NOT DO THIS AT HOME OR IF YOU ARE UNDER A BRIDGE)
On 25 October 2011 16:01, Roger Jowett <rogerjow...@gmail.com> wrote: > did anyone understand how to save the cos sin tables to the disc as a file > no chance of a rem statement or too? > > > On 25 October 2011 15:59, Roger Jowett <rogerjow...@gmail.com> wrote: > >> scroll down to red text please&see attachment >> PALETTE >> >> is probably one of the most "well-known" SAM command, and it has quite a >> large number of variations. >> >> I won't go on about "paint pots" etc, since you should know all that - but >> very briefly, the Coupe can use any 16 out of 128 colours >> >> on the screen at once. The PALETTE command selects which one of the 128 >> colours you want to assign to one of the 16 "pots". >> >> (Sorry!) >> >> When you switch on, some values have already been assigned (good job too - >> otherwise everything would be black and you >> >> wouldn't be able to see anything!). These have been chosen to give normal >> and "bright" versions of black, blue, red, magenta, >> >> green, cyan, yellow and white. (don't ask about bright black..) Just like >> the Spectrum. >> >> PALETTE pot,colour >> >> Where pot is the number (0-15) of the pot you want to change, and colour >> (0-128) is one of the 128 colours to put in the pot. Say >> >> you hate blue, because you're a demented socialist, so you decide to >> replace it with a nice bright red - you know that colour number >> >> 42 is red, and "pot" number 1 is usually blue. PALETTE 1,42 would do the >> job. >> >> To find out what each of the 128 colours looks like (so you know that 42 >> is red in the first place), you can either look at the chart >> >> thing in the Users Guide or type in the little program it gives you to >> display all 128 colours at once. After a while you get to learn >> >> them all anyway, and they are quite ordered. You may think (as I used to) >> that if you displayed all 128 colours in order, you would >> >> get a nice "spectrum" effect, but due to the way they're organised, you >> don't. Originally, the SAM only had 64 colours, but the >> >> design was changed (quite late on) to double this. (More details elsewhere >> in CGTSB - see IN or OUT). >> >> In MODE 1, things are a little confused because as well as having pots >> 0-15, you can also select BRIGHT, which will select another >> >> pot (sort of) - see BRIGHT. You can also have magic paint pots which flash >> (probably radioactive); and you can set up these by >> >> doing something like PALETTE 7,34,127. This will make colour from pot 7 >> (which is the colour used upon switch-on) flash between >> >> colours 34 (red) and 127 (white). The speed of the flashing is controlled >> by SVAR 8. Eg, do POKE SVAR 8,1 to give yourself an >> >> epileptic fit. POKE SVAR 8,255 to give the slowest possible change. So >> you'll be typing away, and the colour will CHANGE after >> >> you've forgotten all about it; give yourself a heart attack as well. >> >> Now the SAM Coupe allows you to have more magic pots of paint (sorry, >> non-toxic wax crayons) which change colour at certain >> >> vertical positions on the screen. These are set up like this: >> >> PALETTE 7,64 LINE 80 >> DOES this mean the LINE 80 command cant be used to >> LINE 95:out(border port), screen off or on value >> would i need to setup a window before hand so that if i needed to edit the >> program the program would scroll in the bit of the screen that was on rather >> than the bit that was off? >> how does the rom know that you are using the border port to turn a section >> of the screen off and on? >> >> This would make ink from pot 7 change colour at line 80, which is about >> half the way up the screen. In the top half of the screen, >> >> then, it would be...whatever you'd selected before, and in the bottom half >> it would be colour 64. (green).Colours can also flash >> >> from specific lines - eg, PALETTE 0,34,99 LINE 80. >> >> In CSIZE 8,8 the LINE can range from -16 to 174. Not 175 as you might >> expect; the Coupe can't change colour there because what's >> >> the point of changing on the very first line displayed? >> >> The advantage of using palette "lines" like this is that it becomes >> possible to "draw" across the border, something which is normally >> >> impossible. Ok, so you can't actually put pictures there, but on the >> Spectrum, you had to resort to very fiddly machine code routines >> >> to do anything with the border. >> >> Also, palette lines can be used to act as simplistic backgrounds for >> programs, which can not be "damaged" by graphics moving >> >> across them. They do, however, require extra processor time, so the >> program can be slowed down if you have lots of palette lines. >> >> Note - my term "palette line" doesn't really mean much; it's my own >> phrase. >> >> On 25 October 2011 15:50, Roger Jowett <rogerjow...@gmail.com> wrote: >> > >> > >> > On 25 October 2011 15:49, Roger Jowett <rogerjow...@gmail.com> wrote: >> >> >> >> >> >> On 25 October 2011 15:48, Roger Jowett <rogerjow...@gmail.com> wrote: >> >>> >> >>> >> >>> On 25 October 2011 15:47, Roger Jowett <rogerjow...@gmail.com> wrote: >> >>>> >> >>>> >> >>>> On 25 October 2011 15:46, Roger Jowett <rogerjow...@gmail.com> >> wrote: >> >>>>> >> >>>>> >> >>>>> On 25 October 2011 15:44, Roger Jowett <rogerjow...@gmail.com> >> wrote: >> >>>>>> >> >>>>>> >> >>>>>> On 25 October 2011 15:43, Roger Jowett <rogerjow...@gmail.com> >> wrote: >> >>>>>>> >> >>>>>>> >> >>>>>>> On 25 October 2011 15:42, Roger Jowett <rogerjow...@gmail.com> >> wrote: >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> On 25 October 2011 15:40, Roger Jowett <rogerjow...@gmail.com> >> wrote: >> >>>>>>>> > >> >>>>>>>> > >> >>>>>>>> >> >>>>>>>> >> >>>>>> >> >>>>> >> >>>> >> >>> >> >> >> > >> >> >> > >