No, but my PSU was very "loud" after few minutes, so I adopted a normal +5V/2A +12V/2A PSU by soldering the SAM PSU connector to it. Works excellent! In the manual they state which pins are GND, +5V and +12V, so it is very easy and modern PSU are smaller and stronger.
LCD 2012/1/14 Aley Keprt <[email protected]> > > Hi guys, does anybody have the original Sam Coupe power supply unit > circuit diagram? > My power supply was damaged years ago and somebody repaired it by > replacing something inside with an old big zener diode. I just remember > that 12V line was dead and that diode is just a random one which we were > able to get. Then in 90's it was not easy to buy good new diodes here, but > it is easy to buy anything on internet now. So I just need to know what was > the original piece in the PSU and I am going to replace it back. > Thanks in advance. > Aley Keprt >
