And fixed by Simon. :-) On Thu, Sep 9, 2021 at 11:46 PM Edwin blink <[email protected]> wrote:
> Thanks Dan and Stefan :) > > > > Didn't want to submit an issue on Github right away in case I was just > missing something obvious ;) > > > > *Van:* Dan Doore [mailto:[email protected]] > *Verzonden:* donderdag 9 september 2021 23:22 > *Aan:* Edwin blink > *CC:* sam-users > *Onderwerp:* Re: [Sam-users] Prodos v2 and simcoupe 1.2.5 > > > > Put this on the SimCoupe GitHub issues - no wait, Stefan has already > logged it :) > > Dan. > > > > > > On 9 Sep 2021, at 22:05, Edwin blink <[email protected]> wrote: > > > > This ones probably for Simon :) > > > > I was playing a bit with prodos v2 and noticed I get a read only error > with current simcoupe buid (1.2.5) > > > > Example: > > -Boot Prodos v2 disk in simcoupe > > -from menu: new DOS CP/M disk > > -format b: -> OK > > -copy a: b: -> is read only error > > -format b: -> Format error > > > > Didn’t have any issues when using simcoupe 1.0 > > > > > > _______________________________________________ > sam-users mailing list > [email protected] > http://nvg.ntnu.no/mailman/listinfo/sam-users > > _______________________________________________ > sam-users mailing list > [email protected] > http://nvg.ntnu.no/mailman/listinfo/sam-users >
_______________________________________________ sam-users mailing list [email protected] http://nvg.ntnu.no/mailman/listinfo/sam-users
