Great!
looking forward to a new Dev build. Van: Stefan Drissen [mailto:[email protected]] Verzonden: vrijdag 10 september 2021 08:12 Aan: Edwin blink CC: Dan Doore; sam-users Onderwerp: Re: [Sam-users] Prodos v2 and simcoupe 1.2.5 And fixed by Simon. :-) On Thu, Sep 9, 2021 at 11:46 PM Edwin blink <[email protected]> wrote: Thanks Dan and Stefan :) Didn't want to submit an issue on Github right away in case I was just missing something obvious ;) Van: Dan Doore [mailto:[email protected]] Verzonden: donderdag 9 september 2021 23:22 Aan: Edwin blink CC: sam-users Onderwerp: Re: [Sam-users] Prodos v2 and simcoupe 1.2.5 Put this on the SimCoupe GitHub issues - no wait, Stefan has already logged it :) Dan. On 9 Sep 2021, at 22:05, Edwin blink <[email protected]> wrote: This ones probably for Simon :) I was playing a bit with prodos v2 and noticed I get a read only error with current simcoupe buid (1.2.5) Example: -Boot Prodos v2 disk in simcoupe -from menu: new DOS CP/M disk -format b: -> OK -copy a: b: -> is read only error -format b: -> Format error Didn’t have any issues when using simcoupe 1.0 _______________________________________________ sam-users mailing list [email protected] http://nvg.ntnu.no/mailman/listinfo/sam-users _______________________________________________ sam-users mailing list [email protected] http://nvg.ntnu.no/mailman/listinfo/sam-users
_______________________________________________ sam-users mailing list [email protected] http://nvg.ntnu.no/mailman/listinfo/sam-users
