Try turn of you firewall. In fw examples is mean that eth1 is gateway to inet and is strictly filered as eth0 in your config is gateway eth0 and yuo must change this in firewall ok. Reply ipchains -L or iptables list...
----- Original Message ----- From: "TheStar" <[EMAIL PROTECTED]> To: "Marian Mlcoch, Ing" <[EMAIL PROTECTED]> Sent: Tuesday, November 12, 2002 9:15 PM Subject: Re: [Samba] Which list for general help? > For my masq settings, etc, I followed the instructions in > http://www.tldp.org/HOWTO/IP-Masquerade-HOWTO/firewall-examples.html > > I used samba 2.2.5 > > And, adding that lo route doesn't appear to make any difference. > > Should I try samba 2.2.6 (or what's the latest)? > > > On Tue, 12 Nov 2002 09:05:55 +0100 > "Marian Mlcoch, Ing" <[EMAIL PROTECTED]> wrote: > > > I have route for lo > > 127.0.0.0 * 255.0.0.0 U 0 0 0 lo > > and all works fine with eth0 and eth1. > > Try reply your masq settings and firewall... > > > > > > ----- Original Message ----- > > From: "TheStar" <[EMAIL PROTECTED]> > > To: "Marian Mlcoch, Ing" <[EMAIL PROTECTED]> > > Sent: Tuesday, November 12, 2002 8:53 AM > > Subject: Re: [Samba] Which list for general help? > > > > > > > > Your route table is bad...remove first route. > > > > And missed local loopback if. > > > > > > Thanks for the prompt reply... I was told to put in the first route by > > the IP MASQ HOWTO... > > > But nevertheless, I removed it, but I still have the same problem... > > > > > > Here is the 'new' (temporary) routing table... > > > > > > root:~# route > > > Kernel IP routing table > > > Destination Gateway Genmask Flags Metric Ref Use > > Iface > > > localhost.local * 255.255.255.255 UH 0 0 0 lo > > > 192.168.1.0 * 255.255.255.0 U 0 0 0 > > eth1 > > > 192.168.0.0 * 255.255.255.0 U 0 0 0 > > eth0 > > > default 192.168.0.1 0.0.0.0 UG 1 0 0 > > eth0 > > > root:~# /usr/samba/bin/findsmb > > > > > > *=DMB > > > +=LMB > > > IP ADDR NETBIOS NAME WORKGROUP/OS/VERSION > > > --------------------------------------------------------------------- > > > 192.168.1.2 THEROCK [ CPCYOUNG ] > > > root:~# > > > > > > About the 'local loopback' - I've never needed to add that.. > > > > > > The wierd thing is... Before I setup masq and before I moved the localnet > > > to eth1... I never had a single problem... Yet, _everything_ else works > > > (ping, internet, dhcp, etc) > > > > > > > > Here is my routing table... > > > > > > > > > > Kernel IP routing table > > > > > Destination Gateway Genmask Flags Metric Ref > > Use > > > > Iface > > > > > 255.255.255.255 * 255.255.255.255 UH 0 0 > > 0 > > > > eth1 > > > > > 192.168.1.0 * 255.255.255.0 U 0 0 > > 0 > > > > eth1 > > > > > 192.168.0.0 * 255.255.255.0 U 0 0 > > 0 > > > > eth0 > > > > > default 192.168.0.1 0.0.0.0 UG 1 0 > > 0 > > > > eth0 > > -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba