I'm using Redhat 8.0. I can't understand why that would be the case since it's been working fine before the eth1 was put in. I think I need to dig into it more and look into your idea..
Cheers, Mun Heng, Ow H/M Engineering Western Digital M'sia DID : 03-7870 5168 -----Original Message----- From: Christoph [mailto:[EMAIL PROTECTED] Sent: Tuesday, August 12, 2003 9:10 PM To: Ow Mun Heng Cc: [EMAIL PROTECTED] Subject: Re: [Samba] RE: Can't find samba server after new NIC installed Hi, is it possible you have a local firewall installed which blocks access over eth1? If this is a recent linux-distro (suse/redhat) this is verry likely to happen. Christoph Ow Mun Heng wrote: > One More thing, after tinkering with it more, I found that Port 139 is > refusing connection. I've got another Linux box, smbclient to the problem > box gave that message. > > Once I removed the NIC, restart samba, then all is better. > > Can anyone help me? I would like to add in another NIC for my backup > solution. > > TYhanks. > > Cheers, > Mun Heng, Ow > H/M Engineering > Western Digital M'sia > DID : 03-7870 5168 > > > -----Original Message----- > From: Ow Mun Heng > Sent: Tuesday, August 12, 2003 6:35 PM > To: '[EMAIL PROTECTED]' > Subject: Can't find samba server after new NIC installed > > > Hi All, > > Perhaps you guys can help me shed some light on this 'problem' I'm > facing. > > I recently added another NIC to my samba server. eth0(10.0.0.251) and > eth1(valid dhcp address) > ETH0 was added to connect to another PC that acts as the backup server. > (dedicated connection) > > Now, Samba won't come back up.. I can still ssh into the server and all. > > Any ideas? I know that the wins needs up to 45mins for the announcement to > work.. but even using ip address on windows (as in > start->run->\\eth1-ip-add) does not work. (windows gives the error - No > Service is operating at the destination network endpoint on the remote > system) > > I've added > interfaces = eth1 > wins server = ipaddress of windows network wins server > > 2003/08/12 18:05:30, 0] > nmbd/nmbd_browsesync.c:find_domain_master_name_query_fail(358) > find_domain_master_name_query_fail: > Unable to find the Domain Master Browser name MY<1b> for the workgroup MY. > Unable to sync browse lists in this workgroup. > > After putting log level = 10, I find this > > > [2003/08/12 18:18:05, 4] nmbd/nmbd_workgroupdb.c:dump_workgroups(289) > dump_workgroups() > dump workgroup on subnet UNICAST_SUBNET: netmask= xxx.yyy.zzz.aaa: > MY(1) current master browser = UNKNOWN > eth1-name 40019a03 (server comment) > > Usually, (before this issue), samba is able to get the current master > browser...(and before, I never even put in the wins server ipaddress and it > works!) > > HELP me please.. > > Cheers, > Mun Heng, Ow > H/M Engineering > Western Digital M'sia > DID : 03-7870 5168 -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
