Hi... Same problem here, running on CentOS 5.* and 4.5.
It was solved by installing the package lockdev. Then you must restart the machine. And problem fixed. ashis.v.purbhoo wrote: > > > Hello... > > Currently in the process of upgrading Samba v2.0.10 to Samba v3.0.x, while > conducting some minimal testing, it turns-out that Samba v3.0.x is > performing slower than Samba v2.0.10. > > Set-ups: > A. Samba v3.0.x --> > Same PC client is accessing the samba share running on Red Hat 4.5 (64bit, > HP DL380) which in turn has an NFS mount coming from another SAN attached > Red Hat 4.5 (64bit, HP DL380). > > B. Samba v2.0.x --> > Same PC client is accessing the samba share running on Red Hat 4.5 (32bit, > Dell T7400) which in turn has an NFS mount coming from another SAN > attached > Red Hat 4.5 (64bit, HP DL380). > > C. Samba v2.0.x --> > Same PC client is accessing the samba share running on Solaris8 (Sun V240) > which in turn has an NFS mount coming from another SAN attached Solaris8 > (Sun V240). > > Trails: > I've tested both Samba versions using the same smb.conf files and have > also > tested with all global defaults (except those required). Played around > with Socket Options & Max Xmit sizes but no luck, it's still slower. This > doesn't sound accurate, shouldn't the Samba v3.0.x be faster than Samba > v2.0.10? What config options/settings should I be looking at? > > Regards, > Ashis > > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/listinfo/samba > > -- View this message in context: http://www.nabble.com/Slow-Samba-writes-over-NFS-tp18510681p19226508.html Sent from the Samba - General mailing list archive at Nabble.com. -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
