Veselin Kantsev wrote:
Thank you much Jeremy,
Do you know of some temporary workaround that I can use for the time being?
Regards,
Veselin,
The simplest way would be to download a copy of the 3.0.24 that you know will
work and install that on the 3.2.3 machine. You don't need to remove 3.2.3, you
can simply install 2.0.24 in the default location of /usr/local/samba. You are
probably safe with 3.0.31. Just download the tarball at:
http://us3.samba.org/samba/ftp/samba-3.0.31.tar.gz
If you need 3.0.24:
http://us1.samba.org/samba/ftp/old-versions/samba-3.0.24.tar.gz
Then simply:
(1) tar -xzf samba-3.0.24.tar.gz # untar the source
(2) cd samba-3.0.24/src # change to the src directory
(3) ./configure # default install in /usr/local/samba
** install any missing packages (gcc, etc..)
(4) make
(5) make install
** now figure out where your smb.conf and smbpasswd files are stored and where
you want you log files. (Usually /etc/samba/ and /var/log) Assumed in step (7)
** make sure you stop 3.2.3 (smbd and nmbd), change to the /usr/local/samba/bin
directory then start your new version of each:
(6) cd /usr/local/samba/bin # new executable location
(7)(a) ./nmbd --daemon --configfile=/etc/samba/smb.conf
--log-basename=log.nmb.test
(7)(b) ./smbd --daemon --configfile=/etc/samba/smb.conf --log-basename
log.smb.test --smb-passwd-file=/etc/samba/smbpasswd --private-dir=/etc/samba
If disaster strikes and everything goes bad, not to worry, simply issue the
command
(8) make revert # Restores original 3.2.3 binaries
#+if they were overwritten
That's it. Takes about 20 minutes total. Your new self-compiled samba will run
just fine until Jeremy is done looking at the problem. It is always good to
have this work-around in your hip-pocket just in case a 'new feature' is
introduced in the latest release ;-)
--
David C. Rankin, J.D., P.E.
Rankin Law Firm, PLLC
510 Ochiltree Street
Nacogdoches, Texas 75961
Telephone: (936) 715-9333
Facsimile: (936) 715-9339
www.rankinlawfirm.com
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba
