I want to thank everyone in helping me.  I took out the unknown mailbox, and
all the tests passed.  Again, I am very thankful for this group.  I have
been using Sambar for a while now, and I still think it is the best system
out there. Thanks again everyone.  Have a great day!
Vince
Windjammer <[EMAIL PROTECTED]> wrote:
>I did the test too... the last one said delivered but it actually went to
my unknown
>mail box. So if someone tried to use that method I'd find it there.
>
>Danny Mallory wrote:
>
>> Yes I think this is one of the things I noticed about the router log that
>> it can
>> appear misleading. This is the same with routing rules that may delete
a
>> message,
>> but yet the router.log shows that it was delivered.. I guess its all about
>> understanding
>> where and what your looking at.
>>
>> At 10/13/2001 06:46 PM, you wrote:
>> >Hello Danny and thanks for your help.  I did the test that Steffen suggested,
>> >and all passed except the last attempt which said it may or may not be
an
>> >open relay but not sure since it was done as an anonymous test.  I did
check
>> >the server.log and all seemed to be rejected!
>> >
>> >Thanks again
>> >
>> >Vince
>> >
>> >
>> >Danny Mallory <[EMAIL PROTECTED]> wrote:
>> > >should be a server.old.. just drag it into notepad.
>> > >
>> > >At 10/13/2001 05:14 PM, you wrote:
>> > >
>> > >>That is one log I didn't check. I just checked the server.log, and
it only
>> > >>had entries from the time I did a restart of the server which was
about
>> >30
>> > >>minutes ago.  Are the server.log archived in same manner as the other
>> > files?
>> > >>  But since you did the test, I can assume for now that my system
at this
>> > >>point is not allowing relays to occur?
>> > >>
>> > >>I really appreciate all the help
>> > >>
>> > >>Vince!
>> > >>
>> > >>Danny Mallory <[EMAIL PROTECTED]> wrote:
>> > >> >Does your server.log show any relay attempt denys?
>> > >> >
>> > >> >At 10/13/2001 03:53 PM, you wrote:
>> > >> >
>> > >> >>Hello Danny,
>> > >> >>
>> > >> >>Yes sir that is my mail server.  Thank you very much for doing
the test.
>> > >> >>I am not sure how the relaying was being done?  I guess everything
is
>> >ok
>> > >> >>now?  Here is a sample of the smtp file I was looking at I am not
>> > including
>> > >> >>the actual ip address  But as far as I can tell looks like this
person
>> > >>was
>> > >> >>trying to relay through me? I have about 50 of these with the same
ip
>> >
>> > >> address
>> > >> >>doing the relaying. I did a ip block here so I know who knowns
the ip.
>> > >>Wonder
>> > >> >>if I should send the smtp log to the ip owner or just drop
>> > >> >>it?  [13/Oct/2001:00:05:02
>> > >> >>-0400] OK [000.00.000.00] [HELO] [0 bytes]
>> > >> xxx.xxx.xx.com[13/Oct/2001:00:05:02
>> > >> >>-0400] OK [] [MAIL] [0 bytes] From: <[EMAIL PROTECTED]>
>> > >> >>[13/Oct/2001:00:05:03 -0400] OK [xxx.xx.xxx.xx] [RCPT] [0 bytes]
>> > >> >>To:<[EMAIL PROTECTED]>
>> > >> >>
>> > >> >>Danny Mallory <[EMAIL PROTECTED]> wrote:
>> > >> >> >Assuming 216.68.165.38 is the mail server your questioning. I
just
>> > >> >> >attempted to relay some
>> > >> >> >mail through it and got stopped with Require AUTH.
>> > >> >> >
>> > >> >> >The message could not be sent because one of the recipients was
>> > rejected
>> > >> >>by
>> > >> >> >the server. The rejected e-mail address was
>> > >> '[EMAIL PROTECTED]'.
>> > >> >>
>> > >> >> >Subject 'Testing 216.68.165.38 mail server', Account:
>> > 'letvffkeyit.com',
>> > >> >>
>> > >> >> >Server: '216.68.165.38', Protocol: SMTP, Server Response: '501
Invalid
>> > >>mail
>> > >> >>
>> > >> >> >recipient. Relay requires SMTP AUTH.', Port: 25, Secure(SSL):
No,
>> >Server
>> > >> >>
>> > >> >> >Error: 501, Error Number: 0x800CCC79
>> > >> >> >
>> > >> >> >
>> > >> >> >Danny
>> > >> >> >
>> > >> >> >At 10/13/2001 02:05 PM, you wrote:
>> > >> >> >>Hello Danny, and thanks for the help.  I am still using version
5.0
>> > >>here
>> > >> >>since
>> > >> >> >>it has been rock solid. I looked in my SMTP log and found one
ip
>> >
>> > >> relaying
>> > >> >> >>a bunch of mail that were not for my users.  I was under the
>> > impression
>> > >> >>that
>> > >> >> >>if the mail is not for a user of your system, that the smtp
will
>> >not
>> > >>go
>> > >> >>
>> > >> >> >>through?
>> > >> >> >>  Not sure what happened? .  I thought if restrict ip address
was
>> >  left
>> > >> >>blank,
>> > >> >> >>an SMTP user may login from any host or has this changed with
any
>> >newer
>> > >> >>
>> > >> >> >>version
>> > >> >> >>of Sambar?  Thanks again have a great afternoon!
>> > >> >> >>Vince
>> > >> >> >>Danny Mallory <[EMAIL PROTECTED]> wrote:
>> > >> >> >> >Require auth overrides relaying. If someone compromised one
of
>> >your
>> > >>email
>> > >> >> >>
>> > >> >> >> >addresses
>> > >> >> >> >and password then they could have sent mail. Also, not sure
what
>> >
>> > >> version
>> > >> >> >>
>> > >> >> >> >your at but
>> > >> >> >> >there was a known issue with the IP address in the restrict
IP
>> >cause
>> > >> >>to
>> > >> >> >>
>> > >> >> >> >open you up
>> > >> >> >> >for relay break both require auth and restrict relay..
>> > >> >> >> >
>> > >> >> >> >Try changing your restrict IP address to blank..
>> > >> >> >> >
>> > >> >> >> >Danny
>> > >> >> >> >
>> > >> >> >> >At 10/13/2001 01:03 PM, you wrote:
>> > >> >> >> >
>> > >> >> >> >>Hello everyone, and hope everyone is doing well?
>> > >> >> >> >>I have a question about smtp relay.  I have been using Sambar
>> >for
>> > >>a
>> > >> >>while
>> > >> >> >> >>now, and all seemed to be working great. It sure is a great
>> > program.
>> > >> >>I
>> > >> >> >>haven't
>> > >> >> >> >>touched anything, so I am not sure how someone was successfull
>> >in
>> > >>using
>> > >> >> >>my
>> > >> >> >> >>sambar mail server as a relay?  I did trace the ip and blocked
>> >it
>> > >>using
>> > >> >> >>
>> > >> >> >> >>Blackice,
>> > >> >> >> >>but I am concerned in this happening again with all these
attacks
>> > >>going
>> > >> >> >>on
>> > >> >> >> >>such as the Red Worm etc!
>> > >> >> >> >>
>> > >> >> >> >>I am turning to my fellow sambar users for help.  Here is
what
>> >I
>> > >>have
>> > >> >>in
>> > >> >> >> >>my config file. Am I missing something? Thanks in advance
>> > >> >> >> >>
>> > >> >> >> >>Vince
>> > >> >> >> >>
>> > >> >> >> >>Run SMTPD: Yes
>> > >> >> >> >>Relay Delivery:  Forward immediately
>> > >> >> >> >>Relay Domains:  I don't have anything in here
>> > >> >> >> >>Use MTA:  Yes
>> > >> >> >> >>Unknown Mailbox:  Null
>> > >> >> >> >>Require Auth:  Yes
>> > >> >> >> >>Restrict Relay:  Yes
>> > >> >> >> >>Restrict Relay IP:  127.0.0.1
>> > >> >> >> >>Relay from User:  I don't have anything here
>> > >> >> >> >>
>> > >> >> >> >>
>> > >> >> >> >>------------------------------------------------------------------
>> >
>> > >> ------
>> > >> >>
>> > >> >> >> --------
>> > >> >> >> >>For unsubscription of this list send an email to
>> > [EMAIL PROTECTED]
>> > >> >>with
>> > >> >> >>
>> > >> >> >> >>email
>> > >> >> >> >>data containing unsubscribe emailadd sambar
>> > >> >> >> >
>> > >> >> >> >
>> > >> >> >> >
>> > >> >> >> >
>> > >> >> >> >-------------------------------------------------------------------
>> >
>> > >> ------
>> > >> >>
>> > >> >> >> -------
>> > >> >> >> >For unsubscription of this list send an email to
>> > [EMAIL PROTECTED]
>> > >> >>with
>> > >> >> >>email
>> > >> >> >> >data containing unsubscribe emailadd sambar
>> > >> >> >> >
>> > >> >> >>
>> > >> >> >>
>> > >> >> >>------------------------------------------------------------------
>> > ------
>> > >>
>> > >> >> --------
>> > >> >> >>For unsubscription of this list send an email to [EMAIL PROTECTED]
>> > >>with
>> > >> >>
>> > >> >> >>email
>> > >> >> >>data containing unsubscribe emailadd sambar
>> > >> >> >
>> > >> >> >
>> > >> >> >
>> > >> >> >
>> > >> >> >-------------------------------------------------------------------
>> > ------
>> > >>
>> > >> >> -------
>> > >> >> >For unsubscription of this list send an email to [EMAIL PROTECTED]
>> > >>with
>> > >> >>email
>> > >> >> >data containing unsubscribe emailadd sambar
>> > >> >> >
>> > >> >>
>> > >> >>
>> > >> >>------------------------------------------------------------------------
>> >
>> > >> --------
>> > >> >>For unsubscription of this list send an email to [EMAIL PROTECTED]
>> >with
>> > >>
>> > >> >>email
>> > >> >>data containing unsubscribe emailadd sambar
>> > >> >
>> > >> >
>> > >> >
>> > >> >
>> > >> >-------------------------------------------------------------------------
>> >
>> > >> -------
>> > >> >For unsubscription of this list send an email to [EMAIL PROTECTED]
>> >with
>> > >>email
>> > >> >data containing unsubscribe emailadd sambar
>> > >> >
>> > >>
>> > >>
>> > >>------------------------------------------------------------------------
>> > --------
>> > >>For unsubscription of this list send an email to [EMAIL PROTECTED]
with
>> >
>> > >>email
>> > >>data containing unsubscribe emailadd sambar
>> > >
>> > >
>> > >
>> > >
>> > >-------------------------------------------------------------------------
>> > -------
>> > >For unsubscription of this list send an email to [EMAIL PROTECTED]
with
>> >email
>> > >data containing unsubscribe emailadd sambar
>> > >
>> >
>> >
>> >--------------------------------------------------------------------------------
>> >For unsubscription of this list send an email to [EMAIL PROTECTED]
with
>> >email
>> >data containing unsubscribe emailadd sambar
>>
>> --------------------------------------------------------------------------------
>> For unsubscription of this list send an email to [EMAIL PROTECTED] with
email
>> data containing unsubscribe emailadd sambar
>
>
>
>--------------------------------------------------------------------------------
>For unsubscription of this list send an email to [EMAIL PROTECTED] with
email
>data containing unsubscribe emailadd sambar
>


--------------------------------------------------------------------------------
For unsubscription of this list send an email to [EMAIL PROTECTED] with email
data containing unsubscribe emailadd sambar

Reply via email to