I'm trying to get this scanner working, and am having zero luck. According to the supported scanners page, I should be using the PIXMA backend, but that requires BJNP, and an nmap says that port is not open, and suggests I should be using MFNP, but PIXMA says you *must* use BJNP, so...
joliver@blinky:~$ !610 sudo nmap -sU -p 8610-8612 192.168.0.20 Starting Nmap 7.60 ( https://nmap.org ) at 2019-01-01 11:39 MST Nmap scan report for 192.168.0.20 Host is up (0.050s latency). PORT STATE SERVICE 8610/udp open|filtered canon-mfnp 8611/udp closed canon-bjnp1 8612/udp closed canon-bjnp2 MAC Address: 80:A5:89:BD:C7:39 (AzureWave Technology) Nmap done: 1 IP address (1 host up) scanned in 2.01 seconds An awful lot of the things I'm finding have to do with specific (non-Canon) scanners. What can I do to start ground-up troubleshooting? -- *********************************************************************** * John Oliver, RHCE http://www.john-oliver.net/ * * * *********************************************************************** -- sane-devel mailing list: [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to [email protected]
