On Tue, Jan 01, 2019 at 10:43:03AM -0800, John Oliver wrote: > I'm trying to get this scanner working, and am having zero luck. > According to the supported scanners page, I should be using the PIXMA > backend, but that requires BJNP, and an nmap says that port is not open, > and suggests I should be using MFNP, but PIXMA says you *must* use BJNP, > so... > > joliver@blinky:~$ !610 > sudo nmap -sU -p 8610-8612 192.168.0.20 > > Starting Nmap 7.60 ( https://nmap.org ) at 2019-01-01 11:39 MST > Nmap scan report for 192.168.0.20 > Host is up (0.050s latency). > > PORT STATE SERVICE > 8610/udp open|filtered canon-mfnp > 8611/udp closed canon-bjnp1 > 8612/udp closed canon-bjnp2 > MAC Address: 80:A5:89:BD:C7:39 (AzureWave Technology) > > Nmap done: 1 IP address (1 host up) scanned in 2.01 seconds
I've attached a small dump showing that there is communication happening, but the scanner still isn't seen / recognized. -- *********************************************************************** * John Oliver, RHCE http://www.john-oliver.net/ * * * ***********************************************************************
scanner.dump
Description: Binary data
-- sane-devel mailing list: [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to [email protected]
