Hi Ralph, this didn't work either because of limitations of my email provider. So I have uploaded the crash report using split.
Good time with your family. -Ulf Am 02.10.19 um 18:31 schrieb Ralph Little: > Hi > You can probably mail it to me directly and it will get sucked offline > by my mailer. > > It is worth a try anyway. > > Cheers > Ralph > > On Wed, Oct 2, 2019, 16:53 Ulf Zibis, <[email protected] > <mailto:[email protected]>> wrote: > > I already have done this, see below or again here: > https://gitlab.com/sane-project/frontend/xsane/issues/15 > Unfortunately I'm unable to upload the crash report, as it is > 10 > MB, it is 25.6 MB. Where can I uplosd it? > > -Ulf > > Am 02.10.19 um 17:49 schrieb Ralph Little: >> Hi, >> I'm currently dealing with some family matters so I'll be out of >> the loop for about 2 or 3 weeks but I would be keen to look into >> the crash when I get back. >> >> If you haven't yet, perhaps create an issue against xsane to >> track it. >> >> Cheers, >> Ralph >> >> On Wed, Oct 2, 2019, 16:10 Ulf Zibis, <[email protected] >> <mailto:[email protected]>> wrote: >> >> Hi Ralph, >> >> you are right. I had to do 2 things: >> >> 1. Uncomment in /etc/sane.d/gt68xx.conf: >> # Mustek ScanExpress 1200 UB Plus: >> override "mustek-scanexpress-1200-ub-plus" >> 2. Get SBfw.usb (instead PS1fw.usb) from here: >> http://www.meier-geinitz.de/sane/gt68xx-backend/ >> >> I used this artikle: https://wiki.ubuntuusers.de/Scanner/gt68xx/ >> >> With scanimage and Simple Scan the scanner works fine, but >> XSane crashes always, after the scan has completed. >> See: https://gitlab.com/sane-project/frontend/xsane/issues/15 >> Unfortunately I'm unable to upload the crash report, as it is >> > 10 MB, it is 25.6 MB. >> >> -Ulf >> >> Am 02.10.19 um 14:01 schrieb Ralph Little: >>> Hi >>> Looks to me like you are missing a firmware file. >>> >>> I don't know about this model but for my Epson Perfection >>> 1670 I had to copy the firmware file off the CD that came >>> with it and drop it in the proper place. >>> >>> Cheers >>> Ralph >>> >>> >>> On Wed, Oct 2, 2019, 11:22 Ulf Zibis, <[email protected] >>> <mailto:[email protected]>> wrote: >>> >>> Hi, >>> >>> I have this old scanner here and want to test if it >>> works on Ubuntu >>> 18.04 64 bit. >>> >>> I get: >>> $ lsusb >>> Bus 006 Device 006: ID 05d8:4002 Ultima Electronics >>> Corp. Artec Ultima >>> 2000 (GT6801 based)/Lifetec LT9385/ScanMagic 1200 UB >>> Plus Scanner >>> $ scanimage -L >>> device `gt68xx:libusb:006:006' is a Mustek BearPaw 1200 >>> CU flatbed scanner >>> $ scanimage -hA >>> Usage: scanimage [OPTION]... >>> [...........] >>> [gt68xx] Couldn't open firmware file >>> (`/usr/share/sane/gt68xx/PS1fw.usb'): No such file or >>> directory >>> scanimage: open of device gt68xx:libusb:006:006 failed: >>> Invalid argument >>> Type ``scanimage --help -d DEVICE'' to get list of all >>> options for DEVICE. >>> >>> List of available devices: >>> gt68xx:libusb:006:006 >>> >>> I guess, I'm missing the right backend. Where can I find it? >>> >>> -Ulf >>> >>>
