Re: [sane-devel] Canon TR4529 (PIXMA TR4500 Series)

Thierry HUCAHRD Fri, 21 Feb 2020 13:24:14 -0800

Le 2020-02-21 21:54, Jean-Marc Spaggiari a écrit :

Interestingly, I don't see the input option anymore :-/ This will
drive me crazy ;)


This is not normal, by default it shouldn't be 0.
I'll correct it, but I have to reproduce it.

scanimage: rounded value of br-x from 0 to 0
scanimage: rounded value of br-y from 0 to 0


./frontend/scanimage -d 'escl:http://192.168.23.130:80'  --all-options
Output format is not set, using pnm as a default.
Capability : [image/jpeg]
Capability : [image/jpeg]
Capability : [image/jpeg]
Capability : [image/jpeg]
scanimage: rounded value of br-x from 0 to 0
scanimage: rounded value of br-y from 0 to 0

All options specific to device `escl:http://192.168.23.130:80':
  Scan mode:
    --mode Gray|Color [Gray]
        Selects the scan mode (e.g., lineart, monochrome, or color).
    --resolution 75|100|150|200|300|600dpi [75]
        Sets the resolution of the scanned image.
    --preview[=(yes|no)] [no]
        Request a preview-quality scan.
    --preview-in-gray[=(yes|no)] [no]
        Request that all previews are done in monochrome mode.  On a
        three-pass scanner this cuts down the number of passes to one
and on a
        one-pass scanner, it reduces the memory requirements and
scan-time of
        the preview.
  Geometry:
    -l 0.0846558..215.9mm [0]
        Top-left x position of scan area.
    -t 0.0846558..297.011mm [0]
        Top-left y position of scan area.
    -x 0.0846558..215.9mm [0]
        Width of scan-area.
    -y 0.0846558..297.011mm [0]
        Height of scan-area.

Le ven. 21 févr. 2020 à 15:43, Jean-Marc Spaggiari
<[email protected]> a écrit :

So I can delete my sane-escl folder?

Here is the output for both default debian installed and locally
build:
(base) jmspaggi@precision5530:~/backends$ scanimage -d
'escl:http://192.168.23.130:80' -x 215 -y 296 -T
Output format is not set, using pnm as a default.
scanimage: scanning image of size 637x877 pixels at 24 bits/pixel
scanimage: acquiring RGB frame, 8 bits/sample
scanimage: reading one scanline, 1911 bytes... PASS
scanimage: reading one byte... PASS
scanimage: stepped read, 2 bytes... PASS
scanimage: stepped read, 4 bytes... PASS
scanimage: stepped read, 8 bytes... PASS
scanimage: stepped read, 16 bytes... PASS
scanimage: stepped read, 32 bytes... PASS
scanimage: stepped read, 64 bytes... PASS
scanimage: stepped read, 128 bytes... PASS
scanimage: stepped read, 256 bytes... PASS
scanimage: stepped read, 512 bytes... PASS
scanimage: stepped read, 1024 bytes... PASS
scanimage: stepped read, 2048 bytes... PASS
scanimage: stepped read, 2047 bytes... PASS
scanimage: stepped read, 1023 bytes... PASS
scanimage: stepped read, 511 bytes... PASS
scanimage: stepped read, 255 bytes... PASS
scanimage: stepped read, 127 bytes... PASS
scanimage: stepped read, 63 bytes... PASS
scanimage: stepped read, 31 bytes... PASS
scanimage: stepped read, 15 bytes... PASS
scanimage: stepped read, 7 bytes... PASS
scanimage: stepped read, 3 bytes... PASS

(base) jmspaggi@precision5530:~/backends$ ./frontend/scanimage -d
'escl:http://192.168.23.130:80' -x 215 -y 296 -T
Output format is not set, using pnm as a default.
Capability : [image/jpeg]
Capability : [image/jpeg]
Capability : [image/jpeg]
Capability : [image/jpeg]
scanimage: rounded value of br-x from 215 to 215
scanimage: rounded value of br-y from 296 to 296
scanimage: scanning image of size 634x874 pixels at 24 bits/pixel
scanimage: acquiring RGB frame, 8 bits/sample
scanimage: reading one scanline, 1902 bytes... PASS
scanimage: reading one byte... PASS
scanimage: stepped read, 2 bytes... PASS
scanimage: stepped read, 4 bytes... PASS
scanimage: stepped read, 8 bytes... PASS
scanimage: stepped read, 16 bytes... PASS
scanimage: stepped read, 32 bytes... PASS
scanimage: stepped read, 64 bytes... PASS
scanimage: stepped read, 128 bytes... PASS
scanimage: stepped read, 256 bytes... PASS
scanimage: stepped read, 512 bytes... PASS
scanimage: stepped read, 1024 bytes... PASS
scanimage: stepped read, 2048 bytes... PASS
scanimage: stepped read, 2047 bytes... PASS
scanimage: stepped read, 1023 bytes... PASS
scanimage: stepped read, 511 bytes... PASS
scanimage: stepped read, 255 bytes... PASS
scanimage: stepped read, 127 bytes... PASS
scanimage: stepped read, 63 bytes... PASS
scanimage: stepped read, 31 bytes... PASS
scanimage: stepped read, 15 bytes... PASS
scanimage: stepped read, 7 bytes... PASS
scanimage: stepped read, 3 bytes... PASS

Le ven. 21 févr. 2020 à 15:40, Thierry HUCAHRD
<[email protected]> a écrit :

Le 2020-02-21 21:28, Jean-Marc Spaggiari a écrit :

@Till: indeed. I had to install the autoconf-archive. It solved

the

issue. Thanks for the guidance.

@Thierry:

(base) jmspaggi@precision5530:~/backends$ sudo

./frontend/scanimage -L

device `pixma:04A91854_13B71E' is a CANON Canon PIXMA TR4500

Series

multi-function peripheral
(base) jmspaggi@precision5530:~/backends$ sudo

./frontend/scanimage -d

'escl:http://192.168.23.130:80'  -T
Output format is not set, using pnm as a default.
scanimage: open of device escl:http://192.168.23.130:80 failed:

Device

busy

So I un-plugged the 2 printers, stopped the 2 and restarted only

the

Canon. I can heat the printer moving but I get the same error:
scanimage: sane_start: Invalid argument

please note that I do that on my "backends" folder, which I got

from

that: git clone https://gitlab.com/sane-project/backends.gitI

also

have a sane-escl folder which I got from the link you sent

before but

there is no "scanimage" there.

sane-escl is archived
Please test this :
$ scanimage -d 'escl:http://192.168.23.130:80' -x 215 -y 296 -T

JMS

Le ven. 21 févr. 2020 à 15:16, Till Kamppeter
<[email protected]> a écrit :

On 21/02/2020 20:26, Jean-Marc Spaggiari wrote:

So.

I have cloned the backend repo:
git clone https://gitlab.com/sane-project/backends.git

Applied the patch (Changed 1200 to 600 and added the last

param).


And now I'm trying to follow the instructions there:
https://help.ubuntu.com/community/CompileSaneFromSource

running ./autogen.sh failes right from the beginning :( I

prints

thousands of lines "patch: **** Can't create file

./ltmain.sh.orig

: Too

many open files" I increased my limit to 10k files, but I'm

getting the

exact same error. I tried to checkout the 1.0.29 but got the

same

error.


after investigations it seems coming from the lack of

autopoint.

apt-get

install solved it.

I tried to run configure with this command:
./configure --prefix=/usr --libdir=/usr/lib/ --sysconfdir=/etc
--localstatedir=/var  --enable-avahi

But it failed:
./configure: line 14868: syntax error near unexpected token

`noext,'

./configure: line 14868: `AX_CXX_COMPILE_STDCXX_11(noext,

optional)'


If you are on Ubuntu, you need to install the

"autoconf-archive"

package.

Till

Re: [sane-devel] Canon TR4529 (PIXMA TR4500 Series)

Reply via email to