Hi, On Tue, 07 Dec 2021 17:44:46 +0900, Thierry Huchard wrote: > Le 2021-12-06 10:37, WATANABE Kazuhiro a écrit : > > Hi, all. > > > > I have tested my Canon XK90 with the following environment. > > > > sane-backends-1.0.32_7 > > sane-airscan-0.99.26 > > xsane-0.999_6 > > FreeBSD 12.2-RELEASE > > > > | $ scanimage -V > > | scanimage (sane-backends) 1.0.32; backend version 1.0.32 > > | $ scanimage -L > > | device `pixma:04A918B6_103859' is a CANON Canon PIXUS XK90 Series > > multi-function peripheral > > | device `escl:https://192.168.0.108:443' is a Canon XK90 series > > platen scanner > > | device `airscan:e0:Canon XK90 series' is a eSCL Canon XK90 series > > ip=192.168.0.108 > > | $ > > > > Scanning all supported resolutions (up to 1200dpi) is good with both > > sane-pixma and sane-airscan. Monochrome scan is also fine. > > > > By the way, sane-escl doesn't work at all. > > > > | $ scanimage -d 'escl:https://192.168.0.108:443' -o test.pnm > > | scanimage: open of device escl:https://192.168.0.108:443 failed: > > Invalid argument > > | $ > Can you provide me with the log file? > SANE_DEBUG_ESCL=255 scanimage -d 'escl:https://192.168.0.108:443' -o > test.pnm 2> escl-xk90.log > > Thierry
OK. The log is: ***** [21:12:28.116002] [sanei_debug] Setting debug level of escl to 255. [21:12:28.116178] [escl] escl sane_init [21:12:28.118200] [escl] escl sane_open [21:12:28.118222] [escl] escl_parse_name [21:12:28.135446] [escl] escl_curl_url: URL: https://192.168.0.108:443/eSCL/ScannerCapabilities [21:12:28.135919] [escl] Before use hack [21:12:28.135933] [escl] After use hack [21:12:28.135942] [escl] Ignoring safety certificates, use https [21:12:28.180634] [escl] The scanner didn't respond: SSL connect error scanimage: open of device escl:https://192.168.0.108:443 failed: Invalid argument [21:12:28.180750] [escl] escl sane_exit ***** -- WATANABE Kazuhiro ([email protected])
