On Tue, 07 Dec 2021 22:06:14 +0900, Thierry Huchard wrote: > Le 2021-12-07 13:44, WATANABE Kazuhiro a écrit : > > Hi, > > > > On Tue, 07 Dec 2021 17:44:46 +0900, > > Thierry Huchard wrote: > >> Le 2021-12-06 10:37, WATANABE Kazuhiro a écrit : > >> > Hi, all. > >> > > >> > I have tested my Canon XK90 with the following environment. > >> > > >> > sane-backends-1.0.32_7 > >> > sane-airscan-0.99.26 > >> > xsane-0.999_6 > >> > FreeBSD 12.2-RELEASE > >> > > >> > | $ scanimage -V > >> > | scanimage (sane-backends) 1.0.32; backend version 1.0.32 > >> > | $ scanimage -L > >> > | device `pixma:04A918B6_103859' is a CANON Canon PIXUS XK90 Series > >> > multi-function peripheral > >> > | device `escl:https://192.168.0.108:443' is a Canon XK90 series > >> > platen scanner > >> > | device `airscan:e0:Canon XK90 series' is a eSCL Canon XK90 series > >> > ip=192.168.0.108 > >> > | $ > >> > > >> > Scanning all supported resolutions (up to 1200dpi) is good with both > >> > sane-pixma and sane-airscan. Monochrome scan is also fine. > >> > > >> > By the way, sane-escl doesn't work at all. > >> > > >> > | $ scanimage -d 'escl:https://192.168.0.108:443' -o test.pnm > >> > | scanimage: open of device escl:https://192.168.0.108:443 failed: > >> > Invalid argument > >> > | $ > >> Can you provide me with the log file? > >> SANE_DEBUG_ESCL=255 scanimage -d 'escl:https://192.168.0.108:443' -o > >> test.pnm 2> escl-xk90.log > >> > >> Thierry > > > > OK. The log is: > > > > ***** > > [21:12:28.116002] [sanei_debug] Setting debug level of escl to 255. > > [21:12:28.116178] [escl] escl sane_init > > [21:12:28.118200] [escl] escl sane_open > > [21:12:28.118222] [escl] escl_parse_name > > [21:12:28.135446] [escl] escl_curl_url: URL: > > https://192.168.0.108:443/eSCL/ScannerCapabilities > > [21:12:28.135919] [escl] Before use hack > > [21:12:28.135933] [escl] After use hack > > [21:12:28.135942] [escl] Ignoring safety certificates, use https > > [21:12:28.180634] [escl] The scanner didn't respond: SSL connect error > > scanimage: open of device escl:https://192.168.0.108:443 failed: > > Invalid argument > > [21:12:28.180750] [escl] escl sane_exit > > ***** > > Thanks for your log feedback! > Can you test this? > > Can you provide me with the log file? > SANE_DEBUG_ESCL=255 scanimage -d 'escl:http://192.168.0.108:80' -o > test.pnm 2> escl-xk90-2.log > > Thierry
It works without any error. The log file is here: https://drive.google.com/drive/folders/13RlFS3mbX_17Q4VeWImqIHgd7zSm0Fjg -- WATANABE Kazuhiro ([email protected])
