hi! I have the usb scanner hp5300c, kernel 2.4.16 and sane 1.0.7 (back- and frontend)
the output of find-scanner is # Note that find-scanner will find any scanner that is connected # to a SCSI bus. It will even find scanners that are not supported # at all by SANE. It won't find a scanner that is connected to a # parallel, USB or other non-SCSI port. find-scanner: found scanner "HP ScanJet 5370C 6.00" at device /dev/scanner find-scanner: found scanner "HP ScanJet 5370C 6.00" at device /dev/sg2 the output of scanimage -L is No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). I use the doku of http://httpd.chello.nl/~j.schoone/scanning.html. But now I don't know, what I should do. thx for all replies. steve
