Hi! I use your avision.* files from your homepage and copied these files in the directory ..sane-backends-1.0.7/backend/
Then I make distclean, configure --enable-scsibuffersize=32768, ... but i get the same output from find-scanner and scanimage -L Have you any idea, what I should do? thx for all replies. steve On Monday 25 February 2002 13:37, you wrote: > Hi. > > On: Mon, 25 Feb 2002 10:34:11 +0100, > > Stefan Kornhuber <[email protected]> wrote: > > hi! > > > > I have the usb scanner hp5300c, kernel 2.4.16 and sane 1.0.7 (back- and > > frontend) > > > > the output of find-scanner is > > # Note that find-scanner will find any scanner that is connected > > # to a SCSI bus. It will even find scanners that are not supported > > # at all by SANE. It won't find a scanner that is connected to a > > # parallel, USB or other non-SCSI port. > > > > find-scanner: found scanner "HP ScanJet 5370C 6.00" at device > > /dev/scanner find-scanner: found scanner "HP ScanJet 5370C 6.00" at > > device /dev/sg2 > > USB and the hpusbscsi SCSI emulation seem to work properly. Good. > > > the output of scanimage -L is > > > > No scanners were identified. If you were expecting something different, > > check that the scanner is plugged in, turned on and detected by the > > sane-find-scanner tool (if appropriate). Please read the documentation > > which came with this software (README, FAQ, manpages). > > Your scanner is partially supported by the avision backend. In the > 1.0.7 you have to enable the HP USB support in the backend by > specifiing optionb "allow-usb" in the > $instll-prefix/etx/sane.d/avision.conf file. This is because of the > alpha-state of the code. (For the exact spelling of the option you > might take a look in the sane-avision man-page ...) > > For more info see: > http://drocklinux.dyndns.org/rene/avision > > and for the latest code: > http://www.rocklinux.org/people/rene/sane > > I recommend the latest source from the side - which should work quite > well for you scanner - and you do not need the allow-usb option > anymore ... > > > I use the doku of http://httpd.chello.nl/~j.schoone/scanning.html. > > Do not know this doc. > > > But now I don't know, what I should do. > > > > thx for all replies. > > Much fun and k33p h4ck1n6 > René
