Hey guys, I was wondering if anybody else out there has tried running sane under Linux on an Ultra Sparc.
The software compiles without a problem, but it seems that it cannot recognize my scanner as such. Here's the output of find-scanner: sane-find-scanner: searching for scanners: sane-find-scanner: checking /dev/scanner... open ok sane-find-scanner: found disk " " at device /dev/scanner sane-find-scanner: checking /dev/sg0... open ok sane-find-scanner: found disk " " at device /dev/sg0 sane-find-scanner: checking /dev/sg1... failed to open sane-find-scanner: checking /dev/sg2... failed to open ...etc... I'm running it using my Adaptec AHA2940UW. Linux sees my scanner just fine: debian:/proc/scsi# cat scsi Attached devices: Host: scsi0 Channel: 00 Id: 05 Lun: 00 Vendor: UMAX Model: Vista-S6E Rev: V1.7 Type: Scanner ANSI SCSI revision: 02 . Any ideas or suggestions as to what I could do to fix this problem? Thanks for the help, Tomislav
