Hi Steven, now the backend is talking to the scanner. But it is getting some problems with the communication. Some new Linux kernels have a bug. Add to your hp.conf-file below the /dev/scanner a line
option disable-scsi-request Maybe this can solve the final problem. --Peter Steven Lembark wrote: <snip> > root@dizzy:bin # export LD_LIBRARY_PATH='/opt/sane/1.0.6/lib/sane'; > > root@dizzy:bin # ./scanimage > [sanei_debug] Setting debug level of dll to 255. > [dll] sane_init: SANE dll backend version 1.0.4 from sane-backends-1.0.6 > [dll] add_backend: adding backend hp > [dll] load: loading backend hp > [dll] load: dlopen()ing `/opt/sane/1.0.6/lib/sane/libsane-hp.so.1' > [dll] init: initializing backend `hp' > [sanei_debug] Setting debug level of hp to 17. > [hp] sane_init called > [hp] sane_init will finish with Success > [dll] init: backend `hp' is version 1.0.8 > [hp] sane_open called > [hp] hp_read_config: hp backend v0.95 starts reading config file > [hp] hp_get_dev: New device /dev/scanner, connect-scsi, scsi-request=1 > [hp] sanei_hp_device_new: /dev/scanner > [hp] scsi_inquire: sending INQUIRE > [hp] scsi_new: sending TEST_UNIT_READY > [hp] scsi_flush: writing 2 bytes: > [hp] 0x0000 1B 45 .E > [hp] scsi_flush: writing 7 bytes: > [hp] 0x0000 1B 2A 73 32 35 37 45 .*s257E > [hp] scl_inq: read failed (Error during device I/O) > [hp] scl_errcheck: Can't read SCL error stack: Error during device I/O > [hp] sanei_hp_device_new: SCL reset failed > [hp] scsi_close: closing fd 3 > [hp] hp_device_info_get: device /dev/scsi/host2/bus0/target1/lun0/generic > not configured. Using default > [hp] hp_get_dev: New device /dev/scsi/host2/bus0/target1/lun0/generic, > connect-scsi, scsi-request=1 > [hp] sanei_hp_device_new: /dev/scsi/host2/bus0/target1/lun0/generic > [hp] scsi_inquire: sending INQUIRE > [hp] scsi_new: sending TEST_UNIT_READY > [hp] scsi_flush: writing 2 bytes: > [hp] 0x0000 1B 45 .E > [hp] scsi_flush: writing 7 bytes: > [hp] 0x0000 1B 2A 73 32 35 37 45 .*s257E > [hp] scl_inq: read failed (Error during device I/O) > [hp] scl_errcheck: Can't read SCL error stack: Error during device I/O > [hp] sanei_hp_device_new: SCL reset failed > [hp] scsi_close: closing fd 3 > scanimage: open of device hp:/dev/scsi/host2/bus0/target1/lun0/generic > failed: Error during device I/O > [dll] sane_exit: exiting > [dll] sane_exit: calling backend `hp's exit function > [hp] sane_exit called > [hp] sane_exit will finish > > Any suggestions on handling this? > > Suggestion: Add a "--sane-libs" switch to sane-config that prints > out where scanimage expects the lib's to be. > > thanx. > > -- > Steven Lembark 2930 W. Palmer > Workhorse Computing Chicago, IL 60647 > +1 800 762 1582 > _______________________________________________ > Sane-devel mailing list > [email protected] > http://www.mostang.com/mailman/listinfo/sane-devel -- Peter Kirchgessner http://www.kirchgessner.net mailto:[email protected] (alternate e-mail: [email protected])
