Try completely uninstalling sane. Make sure the lib/sane directory is gone and do a fresh install. There a re some previous posts on this. Did you upgrade using the rpm that comes with RedHat 7.3?
- Jost On Sunday 12 May 2002 01:37 pm, Morten Arnesen wrote: > hi ! > > i just upgraded sane to 1.0.7 and got some strange problems; > > here is output from rpm: > [root@server /root]# rpm -qa|grep sane > sane-frontends-1.0.7-2 > sane-backends-devel-1.0.7-6 > xsane-0.84-2 > sane-backends-1.0.7-6 > xsane-gimp-0.84-2 > > sane-find-scanner find my scanner ok, but scanimage don't. > > my dll.conf contains "net" and "scanimage". > > my scanimage.conf contains a pointer to /dev/scanner which is a symbolic > link to /dev/sg3. > > output from sane-find-scanner: > [root@server /root]# sane-find-scanner > # Note that sane-find-scanner will find any scanner that is connected > # to a SCSI bus and some scanners that are connected to the Universal > # Serial Bus (USB) depending on your OS. It will even find scanners > # that are not supported at all by SANE. It won't find a scanner that > # is connected to a parallel or proprietary port. > > sane-find-scanner: found SCSI scanner "AGFA SNAPSCAN 310 1.20" at device > /dev/scanner > sane-find-scanner: found SCSI scanner "AGFA SNAPSCAN 310 1.20" at device > /dev/sg3 > sane-find-scanner: found SCSI scanner "AGFA SNAPSCAN 310 1.20" at device > /dev/sgd > > and ouput from scanimage -L: > [root@server /root]# scanimage -L > > No scanners were identified. If you were expecting something different, > check that the scanner is plugged in, turned on and detected by the > sane-find-scanner tool (if appropriate). Please read the documentation > which came with this software (README, FAQ, manpages). > > how do i correct this problems, tough i cannot find a sollution not on > faq nor documentation?
