Jost Diederichs wrote: > > Try completely uninstalling sane. Make sure the lib/sane directory is gone and > do a fresh install. There a re some previous posts on this. > Did you upgrade using the rpm that comes with RedHat 7.3? > yes i did use rpms with 7.3 > - Jost > > On Sunday 12 May 2002 01:37 pm, Morten Arnesen wrote: > > hi ! > > > > i just upgraded sane to 1.0.7 and got some strange problems; > > > > here is output from rpm: > > [root@server /root]# rpm -qa|grep sane > > sane-frontends-1.0.7-2 > > sane-backends-devel-1.0.7-6 > > xsane-0.84-2 > > sane-backends-1.0.7-6 > > xsane-gimp-0.84-2 > > > > sane-find-scanner find my scanner ok, but scanimage don't. > > > > my dll.conf contains "net" and "scanimage". > > > > my scanimage.conf contains a pointer to /dev/scanner which is a symbolic > > link to /dev/sg3. > > > > output from sane-find-scanner: > > [root@server /root]# sane-find-scanner > > # Note that sane-find-scanner will find any scanner that is connected > > # to a SCSI bus and some scanners that are connected to the Universal > > # Serial Bus (USB) depending on your OS. It will even find scanners > > # that are not supported at all by SANE. It won't find a scanner that > > # is connected to a parallel or proprietary port. > > > > sane-find-scanner: found SCSI scanner "AGFA SNAPSCAN 310 1.20" at device > > /dev/scanner > > sane-find-scanner: found SCSI scanner "AGFA SNAPSCAN 310 1.20" at device > > /dev/sg3 > > sane-find-scanner: found SCSI scanner "AGFA SNAPSCAN 310 1.20" at device > > /dev/sgd > > > > and ouput from scanimage -L: > > [root@server /root]# scanimage -L > > > > No scanners were identified. If you were expecting something different, > > check that the scanner is plugged in, turned on and detected by the > > sane-find-scanner tool (if appropriate). Please read the documentation > > which came with this software (README, FAQ, manpages). > > > > how do i correct this problems, tough i cannot find a sollution not on > > faq nor documentation? > _______________________________________________ > Sane-devel mailing list > [email protected] > http://www.mostang.com/mailman/listinfo/sane-devel
-- mvh morten LC1OCT tlf: +47 7027 7036 fax +47 70 27 82 77
