Hi Andras, Ok, I tried following today:
1. I disabled all backends but coolscan2 from the dll.conf file. Unfortunately no sucess here. 2. I used VueScan 7.5.29 and was able to get 2 previews out of it, but as soon I tried to get a regular scan I run into the same problems like before: May 29 00:45:52 euler kernel: usb.c: registered new driver usbscanner May 29 00:45:52 euler kernel: scanner.c: probe_scanner: User specified USB scanner -- Vendor:Product - 4b0:4000 May 29 00:45:52 euler kernel: scanner.c: 0.4.6:USB Scanner Driver May 29 00:49:42 euler kernel: scanner.c: read_scanner(0): funky result:-75. Consult Documentation/usb/scanner.txt. May 29 00:49:42 euler kernel: scanner.c: read_scanner(0): funky result:-75. Consult Documentation/usb/scanner.txt. May 29 00:50:42 euler kernel: usb_control/bulk_msg: timeout May 29 00:50:42 euler kernel: scanner.c: write_scanner: NAK received. May 29 00:50:42 euler kernel: scanner.c: read_scanner(0): funky result:-75. Consult Documentation/usb/scanner.txt. May 29 00:51:42 euler kernel: usb_control/bulk_msg: timeout May 29 00:51:42 euler kernel: scanner.c: write_scanner: NAK received. May 29 00:51:42 euler kernel: scanner.c: read_scanner(0): funky result:-75. Consult Documentation/usb/scanner.txt. 3. Then I changed the USB cable between the scanner and my PC. But also no success. I noticed another strange thing. As soon as I invoke a modprobe scanner I never be able to remove the module again. Any help is appreciated. I can't believe that I have to install Windows on one of my PCs to make the scanner work. Thanks in advance, Erik Major A wrote: > Hi Erik, > > >>I was able to get one scan out of this installation, which makes me >>thinking it should work in some kind of way. But all the other times I >>tried to scan a picture or to aquire a preview the xscanimage command >>just hangs and could not be killed anymore. >> > > Hmmm. Someone else has seen this before, still don't know the > answer. The big question, I think, is whether it works with > VueScan. Have you tried that? If it doesn't, then this is a hardware > problem. > > >>scanner.c: open_scanner(0): Scanner device is already open >> > > Could you try disabling all backends in dll.conf other than coolscan2? > > >>scanner.c: open_scanner(6): Unable to access minor data >>scanner.c: open_scanner(7): Unable to access minor data >> > > I had this recently with an EPSON USB scanner. Reason: flaky USB > contact on the PC side. > > Let me know how you get on, > > Andras > > =========================================================================== > Major Andras > e-mail: [email protected] > www: http://andras.webhop.org/ > =========================================================================== > _______________________________________________ > Sane-devel mailing list > [email protected] > http://www.mostang.com/mailman/listinfo/sane-devel > > -- Erik Riedel Email: [email protected] URL : www.eriedel.com
