Hi Frank, try the hp.conf with
scsi HP /dev/sg0 If this does not work, you may have a second hp.conf at /etc/sane.d/hp.conf. Try that one with the same content. If it still does not work, do as root a chmod 666 /dev/sg0 and try it again. Sincerely Peter Frank Roberts - SOTL wrote: > Hi All: > > I hope You people will have time to help a relative novice with configuration > of an HP 6100 C which is to be used intermidently on 2 different RH 7.3 > systems. > > > As stated previously the scanner is an HP 6100C if I issue the command: > The scanner is connected by 40 pin scsi. > Several commands were issues with the following results: > > $ scanimage --list devices > sg0 HP C2520A 36644 > sg1 Mitsumi CD-R > sg2 Soney CD-RW > > > $ cat /proc/scsi/scsa > Attached devices: > Host: scsi0 Channel: 00 Id: 04 Lun: 00 Vendor: HP Model: C2520A Rev: 3644 > Type: Processor ANSI SCSI revision: 02 > Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: MITSUMI Model: CD-ROM > FX4830T!B > Rev: R02C Type: CD-ROM ANSI SCSI revision: 02 > Host: scsi1 Channel: 00 Id: 01 Lun: 00 Vendor: SONY Model: CD-RW CRX175E2 > Rev: > S002 Type: CD-ROM ANSI SCSI revision: 02 > > > $ export SANE_DEBUGG_HP=17 > $ scanimage -L > [scanei_debug] Setting debug level of hp to 17 > [hp] sane_init called[hp] > [hp] sane_init will finish with Success > [hp] sane_get_devices called > [hp] hp_read_config: hp backend v0.95 start reading conf file > [hp] hp_read_config: processing line <scsi HP> > [hp] hp_read_config: processing line </dev/scaner> > [hp] hp_read_config: attach scsi HP > [hp] hp_read_config: attach /dev/scanner > [hp] hp_get_dev: New device /dev/scanner, connect-scsi, scsi-request=1 > [hp] sanei_hp_device_new: /dev/scanner > [hp] scsi_newopen failed (Invalid argument) > [hp] /dev/scanner: Can't open scsi device > [hp] sane_get_devices will finish with Success > [hp] sane_exit called > [hp] sane_exit will finish > > > The sane configuration file /etc/sane.d/ho.conf is as follows: > scsi HP > /dev/scannet > > I would appreciate any advice you people may be able to offer. > > Thanks > Frank > > Thanks > > > > _______________________________________________ > Sane-devel mailing list > [email protected] > http://www.mostang.com/mailman/listinfo/sane-devel > > -- Peter Kirchgessner http://www.kirchgessner.net mailto:[email protected]
