Le Mercredi 13 Novembre 2002 00:30, Henning Meier-Geinitz a écrit : > Just go ahead. Check if you scanner is detected by sane-find-scanner.
It's all right now: found USB scanner (vendor=0x04a9, product=0x220d) at /dev/usb/scanner0 found USB scanner (vendor=0x04a9 [Canon], product=0x220d [CanoScan]) at libusb:001:003 > If it isn't, the kernel scanner driver probably hasn't detected it > correctly. If it has, try scanimage -L. if that doesn't work, edit > plustek.conf and check that "device /dev/usbscanner" point to the > correct device (printed by sane-find-scanner). However scanimage -L doesn't work. Sorry about the stupid question, but what do you mean "check that "device /dev/usbscanner" point to the correct device " ? In plustek.conf, I have the following: [usb] 0x04a9 0x220d /dev/usb/scanner0 and also: device /dev/usbscanner Finally, do I have a problem with hotplug? Here are my logs: Nov 13 22:19:36 localhost kernel: hub.c: USB new device connect on bus1/2, assigned device number 6 Nov 13 22:19:36 localhost kernel: scanner.c: probe_scanner: User specified USB scanner -- Vendor:Product - 4a9:220d nov 13 22:19:36 localhost scannerdrake[26718]: ### Program is starting ### nov 13 22:19:36 localhost scannerdrake[26718]: ### Program is starting ### nov 13 22:19:36 localhost scannerdrake[26718]: unknown line 1574 ( #for hardware detection) Nov 13 22:19:36 localhost kernel: Device not ready. Make sure there is a disc in the drive. Nov 13 22:19:36 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 520 Nov 13 22:19:36 localhost kernel: sda : READ CAPACITY failed. Nov 13 22:19:36 localhost kernel: sda : status = 1, message = 00, host = 0, driver = 08 Nov 13 22:19:36 localhost kernel: Current sd00:00: sense key Not Ready Nov 13 22:19:36 localhost kernel: Additional sense indicates Medium not present Nov 13 22:19:36 localhost kernel: sda : block size assumed to be 512 bytes, disk size 1GB. Nov 13 22:19:36 localhost kernel: /dev/scsi/host0/bus0/target0/lun0: I/O error: dev 08:00, sector 0 Nov 13 22:19:36 localhost kernel: I/O error: dev 08:00, sector 0 Nov 13 22:19:39 localhost /etc/hotplug/usb.agent: ... no modules for USB product 4a9/220d/100 Sorry, it's very long. Bye, -- Philippe
