I'm running Solaris 9 X86, succesfully built sane-backends-1.0.9, sane-frontends-1.0.9 xsane-0.89
However I'm haveing difficulties locating my scanner. After a boot the first time I run sane-find-scanner it returns nothing. the second time it returns: found SCSI processor "EPSON Perfection1640 1.03" at /dev/scsi/processor/c1t5d0 # Your SCSI scanner was detected. It may or may not be supported by SANE. Try # scanimage -L and read the backend's manpage. # No USB scanners found. If you expected something different, make sure that # you have loaded a driver for your USB host controller and have installed a # kernel scanner module. # Scanners connected to the parallel port or other proprietary ports can't be # detected by this program. # You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary. I can however do: scanimage -d epson:/dev/scsi/processor/c1t5d0 >/tmp/scan it works fine. xsane and xscanimage can't find it tho. Some of the system traces (using truss) I did seem to open the epson.conf file but never the device. Thoughts....
