The scanner is detected well by sane but it fails to open the device as you see below.
[umax] sane_init [umax] This is sane-umax version 1.0 build 40 [umax] compiled with USB support for Astra 2200 [umax] (C) 1997-2002 by Oliver Rauch [umax] EMAIL: [email protected] [umax] reading configure file umax.conf [umax] option scsi-maxqueue = 2 [umax] option scsi-buffer-size-min = 65536 [umax] option scsi-buffer-size-max = 131072 [umax] option scan-lines = 100 [umax] option preview-lines = 20 [umax] option handle-bad-sense-error = 0 [umax] option execute-request-sense = 0 [umax] option slow-speed = -1 [umax] option calibration-full-ccd = -1 [umax] option lamp-control-available = 0 [umax] option connection-type = 1 [umax] attach_scanner: SCSI UMAX Astra 1200S V2.9, connection_type 1 [umax] attach_scanner: opening scsi device SCSI UMAX Astra 1200S V2.9 [umax] ERROR: attach_scanner: opening scsi device SCSI UMAX Astra 1200S V2.9 failed [umax] sanei_config_attach_matching_devices(scsi UMAX Astra 1200S V2.9) [umax] sanei_config_attach_matching_devices(scsi UMAX * Scanner) [umax] attach_scanner: /dev/pass0, connection_type 1 [umax] attach_scanner: opening scsi device /dev/pass0 [umax] ERROR: attach_scanner: opening scsi device /dev/pass0 failed I use the default 5.2 kernel. The scanner ist he only SCSI device. The scanner works fine on my windows laptop. Any idea anyone? Regards, Frank
