I do not think that your scanner is detected, the lines > [umax] attach_scanner: opening scsi device SCSI UMAX Astra 1200S V2.9 > [umax] ERROR: attach_scanner: opening scsi device SCSI UMAX Astra 1200S > V2.9 failed do not mean that the scanner is detected. This only looks like it because= you put a bad line to the umax.conf file: > [umax] sanei_config_attach_matching_devices(scsi UMAX Astra 1200S V2.9)
A furhter problem will be that your scanner is not supported. The firmware version 2.9 is buggy and will not work correct: http://www.rauch-domain.de/sane-umax/sane-umax-astra-doc.html So I suggest you update the firmware at first when you want to use the device with SANE. Best regards Oliver On Friday 05 March 2004 15:45, ATT wrote: > The scanner is detected well by sane but it fails to open the device as= you > see below. > > [umax] sane_init > [umax] This is sane-umax version 1.0 build 40 > [umax] compiled with USB support for Astra 2200 > [umax] (C) 1997-2002 by Oliver Rauch > [umax] EMAIL: [email protected] > [umax] reading configure file umax.conf > [umax] option scsi-maxqueue =3D 2 > [umax] option scsi-buffer-size-min =3D 65536 > [umax] option scsi-buffer-size-max =3D 131072 > [umax] option scan-lines =3D 100 > [umax] option preview-lines =3D 20 > [umax] option handle-bad-sense-error =3D 0 > [umax] option execute-request-sense =3D 0 > [umax] option slow-speed =3D -1 > [umax] option calibration-full-ccd =3D -1 > [umax] option lamp-control-available =3D 0 > [umax] option connection-type =3D 1 > [umax] attach_scanner: SCSI UMAX Astra 1200S V2.9, connection_type 1 > [umax] attach_scanner: opening scsi device SCSI UMAX Astra 1200S V2.9 > [umax] ERROR: attach_scanner: opening scsi device SCSI UMAX Astra 1200S > V2.9 failed > [umax] sanei_config_attach_matching_devices(scsi UMAX Astra 1200S V2.9) > [umax] sanei_config_attach_matching_devices(scsi UMAX * Scanner) > [umax] attach_scanner: /dev/pass0, connection_type 1 > [umax] attach_scanner: opening scsi device /dev/pass0 > [umax] ERROR: attach_scanner: opening scsi device /dev/pass0 failed > > I use the default 5.2 kernel. The scanner ist he only SCSI device. > > The scanner works fine on my windows laptop. > > Any idea anyone? > > Regards, > > Frank --=20 http://www.xsane.org http://www.rauch-domain.de http://www.sane-project.org
