Hi all, I have a HP scanner C6270A rev 3828. Here's the output of /proc/scsi/scsi:
Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: HL-DT-ST Model: CD-RW GCE-8481B Rev: 1.10 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 03 Lun: 00 Vendor: HP Model: C6270A Rev: 3828 Type: Processor ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 05 Lun: 00 Vendor: IOMEGA Model: ZIP 100 Rev: J.03 Type: Direct-Access ANSI SCSI revision: 02 sane-find-scanner finds it: -- found SCSI processor "HP C6270A 3828" at /dev/scanner found SCSI processor "HP C6270A 3828" at /dev/sg1 found SCSI processor "HP C6270A 3828" at /dev/sgb # Your SCSI scanner was detected. It may or may not be supported by SANE. Try # scanimage -L and read the backend's manpage. -- But scanimage -L doesn't detect it! -- [ko@localhost scsi]# scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). -- Here's the /etc/sane.d/hp.conf: scsi HP /dev/sg1 and the hp driver appears in /etc/sane.d/dll.conf [ko@localhost scsi]# grep hp /etc/sane.d/dll.conf hp hpsj5s # HP OfficeJet backend homepage: http://hpoj.sf.net/ # Uncomment the following line if hpoj is installed: #hpoj Could anyone give some hints as what's wrong? Thanks, -- Yao Ko Engineering & Computer Science Concordia University Tel: (514) 848-2424 x5879 Office: H1029-7 http://www.cs.concordia.ca/~ko/
