Hi, this is a HP SanJet 62x0C. What SCSI-controller are you using ? Is it a Buslogic ?
--Peter Yao Ko schrieb: > Hi all, > > I have a HP scanner C6270A rev 3828. Here's the output of > /proc/scsi/scsi: > > > Attached devices: > Host: scsi0 Channel: 00 Id: 00 Lun: 00 > Vendor: HL-DT-ST Model: CD-RW GCE-8481B Rev: 1.10 > Type: CD-ROM ANSI SCSI revision: 02 > Host: scsi1 Channel: 00 Id: 03 Lun: 00 > Vendor: HP Model: C6270A Rev: 3828 > Type: Processor ANSI SCSI revision: 02 > Host: scsi1 Channel: 00 Id: 05 Lun: 00 > Vendor: IOMEGA Model: ZIP 100 Rev: J.03 > Type: Direct-Access ANSI SCSI revision: 02 > > sane-find-scanner finds it: > > -- > found SCSI processor "HP C6270A 3828" at /dev/scanner > found SCSI processor "HP C6270A 3828" at /dev/sg1 > found SCSI processor "HP C6270A 3828" at /dev/sgb > # Your SCSI scanner was detected. It may or may not be supported by SANE. > Try > # scanimage -L and read the backend's manpage. > -- > > > But scanimage -L doesn't detect it! > > -- > [ko@localhost scsi]# scanimage -L > > No scanners were identified. If you were expecting something different, > check that the scanner is plugged in, turned on and detected by the > sane-find-scanner tool (if appropriate). Please read the documentation > which came with this software (README, FAQ, manpages). > -- > > Here's the /etc/sane.d/hp.conf: > > scsi HP > /dev/sg1 > > > and the hp driver appears in /etc/sane.d/dll.conf > > [ko@localhost scsi]# grep hp /etc/sane.d/dll.conf > hp > hpsj5s > # HP OfficeJet backend homepage: http://hpoj.sf.net/ > # Uncomment the following line if hpoj is installed: > #hpoj > > > Could anyone give some hints as what's wrong? > > Thanks, > -- Peter Kirchgessner http://www.kirchgessner.net mailto:[email protected]
