Hi, thank you for your very fast reply! I have applied the sane-scsibuffersize.patch (more memory seldom hurts), but with no difference. This is my log:
goliath:~ sroeper$ export SANE_DEBUG_MICROTEK=255 goliath:~ sroeper$ scanimage -L [sanei_debug] Setting debug level of microtek to 255. [microtek] sane_init: MICROTEK says hello! (v0.13.1) [microtek] sane_init: config-> # Uncomment following line to disable "real calibration" routines... [microtek] sane_init: config-> #norealcal [microtek] sane_init: config-> # Uncomment following line to disable "clever precalibration" routines... [microtek] sane_init: config-> #noprecal [microtek] sane_init: config-> # Using "norealcal" will revert backend to pre-0.11.0 calibration code. [microtek] sane_init: config-> scsi * * Scanner [microtek] attach_scanner: iokitscsi@<01582900000000121287b191> [microtek] attach_scanner: opening iokitscsi@<01582900000000121287b191> [microtek] attach_scanner: sending INQUIRY [microtek] id_microtek... [microtek] parse_inquiry... [microtek] parse_inquiry: E6 falsely denies expanded resolution. [microtek] parse_inquiry: E6 falsely denies 1024-byte LUT. [microtek] dump_inquiry... [microtek] === SANE/Microtek backend v0.13.1 === [microtek] ========== Scanner Inquiry Block ========mm [microtek] 06 31 13 01 5b 16 00 00 20 20 20 20 20 20 20 20 [microtek] 53 63 61 6e 6e 65 72 20 36 30 30 20 20 20 20 20 [microtek] 31 2e 39 31 53 43 53 49 20 46 2f 57 56 33 2e 34 [microtek] 20 43 54 4c 35 33 38 30 03 4f 8c c5 03 ee 66 17 [microtek] 00 03 01 00 00 03 00 01 0e 0e 01 05 00 00 00 00 [microtek] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff [microtek] ========== Scanner Inquiry Report ========== [microtek] ===== Scanner ID... [microtek] Device Type Code: 0x06 [microtek] Model Code: 0x66 [microtek] Vendor Name: ' ' Model Name: 'Scanner 600 ' [microtek] Vendor Specific String: 'SCSI F/WV3.4 CTL5380' [microtek] Firmware Rev: '1.91' [microtek] SCSI F/W version: 3.1 Scanner F/W version: 1.3 [microtek] Response data format: 0x01 [microtek] ===== Imaging Capabilities... [microtek] Modes: Lineart Halftone Gray Color (OnePass) [microtek] Resolution Step Sizes: 1% 5% Expanded Resolution Support? yes(but says no) [microtek] Supported Bits Per Sample: 4 8 [microtek] Max. document size code: 0x03 [microtek] Max. document size: 5099 x 7799 pixels [microtek] Frame units: pixels 1/8"'s [microtek] # of built-in halftones: 12 Downloadable patterns? Yes [microtek] Data Compression: [microtek] Contrast Settings: 14 Exposure Settings: 14 [microtek] Adjustable Shadow/Highlight? yes Adjustable Midtone? yes [microtek] Digital brightness/offset? yes [microtek] Gamma Table Size: 1024 entries of 1 bytes (max. depth: 8) [microtek] ===== Source Options... [microtek] Feed type: flatbed ADF support? yes [microtek] Document Feeder Support? yes Feeder Backtracking? yes [microtek] Feeder Installed? yes Feeder Ready? no [microtek] Transparency Adapter Installed? no [microtek] Fast Color Prescan? no [microtek] Selectable Transfer Format? no [microtek] Color Transfer Sequence: line-by-line, non-sequential with headers [microtek] Three pass scan support? yes [microtek] ModeSelect-1 and ModeSense-1 Support? yes [microtek] Can Disable Linearization Table? no [microtek] Can Disable Start-of-Scan Recalibration? yes [microtek] Internal expanded expansion? no [microtek] ====== End of Scanner Inquiry Report ======= [microtek] attach_scanner: happy. [microtek] attach_scanner: iokitscsi@<0158270000000012131e6141> [microtek] attach_scanner: opening iokitscsi@<0158270000000012131e6141> [microtek] attach_scanner: sending INQUIRY [microtek] id_microtek... [microtek] parse_inquiry... [microtek] parse_inquiry: E6 falsely denies expanded resolution. [microtek] parse_inquiry: E6 falsely denies 1024-byte LUT. [microtek] dump_inquiry... [microtek] === SANE/Microtek backend v0.13.1 === [microtek] ========== Scanner Inquiry Block ========mm [microtek] 06 31 13 01 5b 16 00 00 20 20 20 20 20 20 20 20 [microtek] 53 63 61 6e 6e 65 72 20 36 30 30 20 20 20 20 20 [microtek] 31 2e 39 31 53 43 53 49 20 46 2f 57 56 33 2e 34 [microtek] 20 43 54 4c 35 33 38 30 03 4f 8c c5 03 ee 66 17 [microtek] 00 03 01 00 00 03 00 01 0e 0e 01 05 00 00 00 00 [microtek] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff [microtek] ========== Scanner Inquiry Report ========== [microtek] ===== Scanner ID... [microtek] Device Type Code: 0x06 [microtek] Model Code: 0x66 [microtek] Vendor Name: ' ' Model Name: 'Scanner 600 ' [microtek] Vendor Specific String: 'SCSI F/WV3.4 CTL5380' [microtek] Firmware Rev: '1.91' [microtek] SCSI F/W version: 3.1 Scanner F/W version: 1.3 [microtek] Response data format: 0x01 [microtek] ===== Imaging Capabilities... [microtek] Modes: Lineart Halftone Gray Color (OnePass) [microtek] Resolution Step Sizes: 1% 5% Expanded Resolution Support? yes(but says no) [microtek] Supported Bits Per Sample: 4 8 [microtek] Max. document size code: 0x03 [microtek] Max. document size: 5099 x 7799 pixels [microtek] Frame units: pixels 1/8"'s [microtek] # of built-in halftones: 12 Downloadable patterns? Yes [microtek] Data Compression: [microtek] Contrast Settings: 14 Exposure Settings: 14 [microtek] Adjustable Shadow/Highlight? yes Adjustable Midtone? yes [microtek] Digital brightness/offset? yes [microtek] Gamma Table Size: 1024 entries of 1 bytes (max. depth: 8) [microtek] ===== Source Options... [microtek] Feed type: flatbed ADF support? yes [microtek] Document Feeder Support? yes Feeder Backtracking? yes [microtek] Feeder Installed? yes Feeder Ready? no [microtek] Transparency Adapter Installed? no [microtek] Fast Color Prescan? no [microtek] Selectable Transfer Format? no [microtek] Color Transfer Sequence: line-by-line, non-sequential with headers [microtek] Three pass scan support? yes [microtek] ModeSelect-1 and ModeSense-1 Support? yes [microtek] Can Disable Linearization Table? no [microtek] Can Disable Start-of-Scan Recalibration? yes [microtek] Internal expanded expansion? no [microtek] ====== End of Scanner Inquiry Report ======= [microtek] attach_scanner: happy. [microtek] attach_scanner: iokitscsi@<01588f000000001213b2e567> [microtek] attach_scanner: opening iokitscsi@<01588f000000001213b2e567> [microtek] attach_scanner: sending INQUIRY [microtek] id_microtek... [microtek] parse_inquiry... [microtek] parse_inquiry: E6 falsely denies expanded resolution. [microtek] parse_inquiry: E6 falsely denies 1024-byte LUT. [microtek] dump_inquiry... [microtek] === SANE/Microtek backend v0.13.1 === [microtek] ========== Scanner Inquiry Block ========mm [microtek] 06 31 13 01 5b 16 00 00 20 20 20 20 20 20 20 20 [microtek] 53 63 61 6e 6e 65 72 20 36 30 30 20 20 20 20 20 [microtek] 31 2e 39 31 53 43 53 49 20 46 2f 57 56 33 2e 34 [microtek] 20 43 54 4c 35 33 38 30 03 4f 8c c5 03 ee 66 17 [microtek] 00 03 01 00 00 03 00 01 0e 0e 01 05 00 00 00 00 [microtek] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff [microtek] ========== Scanner Inquiry Report ========== [microtek] ===== Scanner ID... [microtek] Device Type Code: 0x06 [microtek] Model Code: 0x66 [microtek] Vendor Name: ' ' Model Name: 'Scanner 600 ' [microtek] Vendor Specific String: 'SCSI F/WV3.4 CTL5380' [microtek] Firmware Rev: '1.91' [microtek] SCSI F/W version: 3.1 Scanner F/W version: 1.3 [microtek] Response data format: 0x01 [microtek] ===== Imaging Capabilities... [microtek] Modes: Lineart Halftone Gray Color (OnePass) [microtek] Resolution Step Sizes: 1% 5% Expanded Resolution Support? yes(but says no) [microtek] Supported Bits Per Sample: 4 8 [microtek] Max. document size code: 0x03 [microtek] Max. document size: 5099 x 7799 pixels [microtek] Frame units: pixels 1/8"'s [microtek] # of built-in halftones: 12 Downloadable patterns? Yes [microtek] Data Compression: [microtek] Contrast Settings: 14 Exposure Settings: 14 [microtek] Adjustable Shadow/Highlight? yes Adjustable Midtone? yes [microtek] Digital brightness/offset? yes [microtek] Gamma Table Size: 1024 entries of 1 bytes (max. depth: 8) [microtek] ===== Source Options... [microtek] Feed type: flatbed ADF support? yes [microtek] Document Feeder Support? yes Feeder Backtracking? yes [microtek] Feeder Installed? yes Feeder Ready? no [microtek] Transparency Adapter Installed? no [microtek] Fast Color Prescan? no [microtek] Selectable Transfer Format? no [microtek] Color Transfer Sequence: line-by-line, non-sequential with headers [microtek] Three pass scan support? yes [microtek] ModeSelect-1 and ModeSense-1 Support? yes [microtek] Can Disable Linearization Table? no [microtek] Can Disable Start-of-Scan Recalibration? yes [microtek] Internal expanded expansion? no [microtek] ====== End of Scanner Inquiry Report ======= [microtek] attach_scanner: happy. [microtek] attach_scanner: iokitscsi@<01588d000000001214403c66> [microtek] attach_scanner: opening iokitscsi@<01588d000000001214403c66> [microtek] attach_scanner: sending INQUIRY [microtek] id_microtek... [microtek] parse_inquiry... [microtek] parse_inquiry: E6 falsely denies expanded resolution. [microtek] parse_inquiry: E6 falsely denies 1024-byte LUT. [microtek] dump_inquiry... [microtek] === SANE/Microtek backend v0.13.1 === [microtek] ========== Scanner Inquiry Block ========mm [microtek] 06 31 13 01 5b 16 00 00 20 20 20 20 20 20 20 20 [microtek] 53 63 61 6e 6e 65 72 20 36 30 30 20 20 20 20 20 [microtek] 31 2e 39 31 53 43 53 49 20 46 2f 57 56 33 2e 34 [microtek] 20 43 54 4c 35 33 38 30 03 4f 8c c5 03 ee 66 17 [microtek] 00 03 01 00 00 03 00 01 0e 0e 01 05 00 00 00 00 [microtek] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff [microtek] ========== Scanner Inquiry Report ========== [microtek] ===== Scanner ID... [microtek] Device Type Code: 0x06 [microtek] Model Code: 0x66 [microtek] Vendor Name: ' ' Model Name: 'Scanner 600 ' [microtek] Vendor Specific String: 'SCSI F/WV3.4 CTL5380' [microtek] Firmware Rev: '1.91' [microtek] SCSI F/W version: 3.1 Scanner F/W version: 1.3 [microtek] Response data format: 0x01 [microtek] ===== Imaging Capabilities... [microtek] Modes: Lineart Halftone Gray Color (OnePass) [microtek] Resolution Step Sizes: 1% 5% Expanded Resolution Support? yes(but says no) [microtek] Supported Bits Per Sample: 4 8 [microtek] Max. document size code: 0x03 [microtek] Max. document size: 5099 x 7799 pixels [microtek] Frame units: pixels 1/8"'s [microtek] # of built-in halftones: 12 Downloadable patterns? Yes [microtek] Data Compression: [microtek] Contrast Settings: 14 Exposure Settings: 14 [microtek] Adjustable Shadow/Highlight? yes Adjustable Midtone? yes [microtek] Digital brightness/offset? yes [microtek] Gamma Table Size: 1024 entries of 1 bytes (max. depth: 8) [microtek] ===== Source Options... [microtek] Feed type: flatbed ADF support? yes [microtek] Document Feeder Support? yes Feeder Backtracking? yes [microtek] Feeder Installed? yes Feeder Ready? no [microtek] Transparency Adapter Installed? no [microtek] Fast Color Prescan? no [microtek] Selectable Transfer Format? no [microtek] Color Transfer Sequence: line-by-line, non-sequential with headers [microtek] Three pass scan support? yes [microtek] ModeSelect-1 and ModeSense-1 Support? yes [microtek] Can Disable Linearization Table? no [microtek] Can Disable Start-of-Scan Recalibration? yes [microtek] Internal expanded expansion? no [microtek] ====== End of Scanner Inquiry Report ======= [microtek] attach_scanner: happy. [microtek] attach_scanner: iokitscsi@<015885000000001214ced725> [microtek] attach_scanner: opening iokitscsi@<015885000000001214ced725> [microtek] attach_scanner: sending INQUIRY [microtek] id_microtek... [microtek] parse_inquiry... [microtek] parse_inquiry: E6 falsely denies expanded resolution. [microtek] parse_inquiry: E6 falsely denies 1024-byte LUT. [microtek] dump_inquiry... [microtek] === SANE/Microtek backend v0.13.1 === [microtek] ========== Scanner Inquiry Block ========mm [microtek] 06 31 13 01 5b 16 00 00 20 20 20 20 20 20 20 20 [microtek] 53 63 61 6e 6e 65 72 20 36 30 30 20 20 20 20 20 [microtek] 31 2e 39 31 53 43 53 49 20 46 2f 57 56 33 2e 34 [microtek] 20 43 54 4c 35 33 38 30 03 4f 8c c5 03 ee 66 17 [microtek] 00 03 01 00 00 03 00 01 0e 0e 01 05 00 00 00 00 [microtek] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff [microtek] ========== Scanner Inquiry Report ========== [microtek] ===== Scanner ID... [microtek] Device Type Code: 0x06 [microtek] Model Code: 0x66 [microtek] Vendor Name: ' ' Model Name: 'Scanner 600 ' [microtek] Vendor Specific String: 'SCSI F/WV3.4 CTL5380' [microtek] Firmware Rev: '1.91' [microtek] SCSI F/W version: 3.1 Scanner F/W version: 1.3 [microtek] Response data format: 0x01 [microtek] ===== Imaging Capabilities... [microtek] Modes: Lineart Halftone Gray Color (OnePass) [microtek] Resolution Step Sizes: 1% 5% Expanded Resolution Support? yes(but says no) [microtek] Supported Bits Per Sample: 4 8 [microtek] Max. document size code: 0x03 [microtek] Max. document size: 5099 x 7799 pixels [microtek] Frame units: pixels 1/8"'s [microtek] # of built-in halftones: 12 Downloadable patterns? Yes [microtek] Data Compression: [microtek] Contrast Settings: 14 Exposure Settings: 14 [microtek] Adjustable Shadow/Highlight? yes Adjustable Midtone? yes [microtek] Digital brightness/offset? yes [microtek] Gamma Table Size: 1024 entries of 1 bytes (max. depth: 8) [microtek] ===== Source Options... [microtek] Feed type: flatbed ADF support? yes [microtek] Document Feeder Support? yes Feeder Backtracking? yes [microtek] Feeder Installed? yes Feeder Ready? no [microtek] Transparency Adapter Installed? no [microtek] Fast Color Prescan? no [microtek] Selectable Transfer Format? no [microtek] Color Transfer Sequence: line-by-line, non-sequential with headers [microtek] Three pass scan support? yes [microtek] ModeSelect-1 and ModeSense-1 Support? yes [microtek] Can Disable Linearization Table? no [microtek] Can Disable Start-of-Scan Recalibration? yes [microtek] Internal expanded expansion? no [microtek] ====== End of Scanner Inquiry Report ======= [microtek] attach_scanner: happy. [microtek] attach_scanner: iokitscsi@<015883000000001215646d11> [microtek] attach_scanner: opening iokitscsi@<015883000000001215646d11> [microtek] attach_scanner: sending INQUIRY [microtek] id_microtek... [microtek] parse_inquiry... [microtek] parse_inquiry: E6 falsely denies expanded resolution. [microtek] parse_inquiry: E6 falsely denies 1024-byte LUT. [microtek] dump_inquiry... [microtek] === SANE/Microtek backend v0.13.1 === [microtek] ========== Scanner Inquiry Block ========mm [microtek] 06 31 13 01 5b 16 00 00 20 20 20 20 20 20 20 20 [microtek] 53 63 61 6e 6e 65 72 20 36 30 30 20 20 20 20 20 [microtek] 31 2e 39 31 53 43 53 49 20 46 2f 57 56 33 2e 34 [microtek] 20 43 54 4c 35 33 38 30 03 4f 8c c5 03 ee 66 17 [microtek] 00 03 01 00 00 03 00 01 0e 0e 01 05 00 00 00 00 [microtek] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff [microtek] ========== Scanner Inquiry Report ========== [microtek] ===== Scanner ID... [microtek] Device Type Code: 0x06 [microtek] Model Code: 0x66 [microtek] Vendor Name: ' ' Model Name: 'Scanner 600 ' [microtek] Vendor Specific String: 'SCSI F/WV3.4 CTL5380' [microtek] Firmware Rev: '1.91' [microtek] SCSI F/W version: 3.1 Scanner F/W version: 1.3 [microtek] Response data format: 0x01 [microtek] ===== Imaging Capabilities... [microtek] Modes: Lineart Halftone Gray Color (OnePass) [microtek] Resolution Step Sizes: 1% 5% Expanded Resolution Support? yes(but says no) [microtek] Supported Bits Per Sample: 4 8 [microtek] Max. document size code: 0x03 [microtek] Max. document size: 5099 x 7799 pixels [microtek] Frame units: pixels 1/8"'s [microtek] # of built-in halftones: 12 Downloadable patterns? Yes [microtek] Data Compression: [microtek] Contrast Settings: 14 Exposure Settings: 14 [microtek] Adjustable Shadow/Highlight? yes Adjustable Midtone? yes [microtek] Digital brightness/offset? yes [microtek] Gamma Table Size: 1024 entries of 1 bytes (max. depth: 8) [microtek] ===== Source Options... [microtek] Feed type: flatbed ADF support? yes [microtek] Document Feeder Support? yes Feeder Backtracking? yes [microtek] Feeder Installed? yes Feeder Ready? no [microtek] Transparency Adapter Installed? no [microtek] Fast Color Prescan? no [microtek] Selectable Transfer Format? no [microtek] Color Transfer Sequence: line-by-line, non-sequential with headers [microtek] Three pass scan support? yes [microtek] ModeSelect-1 and ModeSense-1 Support? yes [microtek] Can Disable Linearization Table? no [microtek] Can Disable Start-of-Scan Recalibration? yes [microtek] Internal expanded expansion? no [microtek] ====== End of Scanner Inquiry Report ======= [microtek] attach_scanner: happy. [microtek] attach_scanner: iokitscsi@<0158fb000000001215f2e73d> [microtek] attach_scanner: opening iokitscsi@<0158fb000000001215f2e73d> [microtek] attach_scanner: sending INQUIRY [microtek] id_microtek... [microtek] parse_inquiry... [microtek] parse_inquiry: E6 falsely denies expanded resolution. [microtek] parse_inquiry: E6 falsely denies 1024-byte LUT. [microtek] dump_inquiry... [microtek] === SANE/Microtek backend v0.13.1 === [microtek] ========== Scanner Inquiry Block ========mm [microtek] 06 31 13 01 5b 16 00 00 20 20 20 20 20 20 20 20 [microtek] 53 63 61 6e 6e 65 72 20 36 30 30 20 20 20 20 20 [microtek] 31 2e 39 31 53 43 53 49 20 46 2f 57 56 33 2e 34 [microtek] 20 43 54 4c 35 33 38 30 03 4f 8c c5 03 ee 66 17 [microtek] 00 03 01 00 00 03 00 01 0e 0e 01 05 00 00 00 00 [microtek] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff [microtek] ========== Scanner Inquiry Report ========== [microtek] ===== Scanner ID... [microtek] Device Type Code: 0x06 [microtek] Model Code: 0x66 [microtek] Vendor Name: ' ' Model Name: 'Scanner 600 ' [microtek] Vendor Specific String: 'SCSI F/WV3.4 CTL5380' [microtek] Firmware Rev: '1.91' [microtek] SCSI F/W version: 3.1 Scanner F/W version: 1.3 [microtek] Response data format: 0x01 [microtek] ===== Imaging Capabilities... [microtek] Modes: Lineart Halftone Gray Color (OnePass) [microtek] Resolution Step Sizes: 1% 5% Expanded Resolution Support? yes(but says no) [microtek] Supported Bits Per Sample: 4 8 [microtek] Max. document size code: 0x03 [microtek] Max. document size: 5099 x 7799 pixels [microtek] Frame units: pixels 1/8"'s [microtek] # of built-in halftones: 12 Downloadable patterns? Yes [microtek] Data Compression: [microtek] Contrast Settings: 14 Exposure Settings: 14 [microtek] Adjustable Shadow/Highlight? yes Adjustable Midtone? yes [microtek] Digital brightness/offset? yes [microtek] Gamma Table Size: 1024 entries of 1 bytes (max. depth: 8) [microtek] ===== Source Options... [microtek] Feed type: flatbed ADF support? yes [microtek] Document Feeder Support? yes Feeder Backtracking? yes [microtek] Feeder Installed? yes Feeder Ready? no [microtek] Transparency Adapter Installed? no [microtek] Fast Color Prescan? no [microtek] Selectable Transfer Format? no [microtek] Color Transfer Sequence: line-by-line, non-sequential with headers [microtek] Three pass scan support? yes [microtek] ModeSelect-1 and ModeSense-1 Support? yes [microtek] Can Disable Linearization Table? no [microtek] Can Disable Start-of-Scan Recalibration? yes [microtek] Internal expanded expansion? no [microtek] ====== End of Scanner Inquiry Report ======= [microtek] attach_scanner: happy. [microtek] attach_scanner: iokitscsi@<0158f900000000122670cd53> [microtek] attach_scanner: opening iokitscsi@<0158f900000000122670cd53> [microtek] attach_scanner: sending INQUIRY [microtek] id_microtek... [microtek] parse_inquiry... [microtek] parse_inquiry: E6 falsely denies expanded resolution. [microtek] parse_inquiry: E6 falsely denies 1024-byte LUT. [microtek] dump_inquiry... [microtek] === SANE/Microtek backend v0.13.1 === [microtek] ========== Scanner Inquiry Block ========mm [microtek] 06 31 13 01 5b 16 00 00 20 20 20 20 20 20 20 20 [microtek] 53 63 61 6e 6e 65 72 20 36 30 30 20 20 20 20 20 [microtek] 31 2e 39 31 53 43 53 49 20 46 2f 57 56 33 2e 34 [microtek] 20 43 54 4c 35 33 38 30 03 4f 8c c5 03 ee 66 17 [microtek] 00 03 01 00 00 03 00 01 0e 0e 01 05 00 00 00 00 [microtek] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff [microtek] ========== Scanner Inquiry Report ========== [microtek] ===== Scanner ID... [microtek] Device Type Code: 0x06 [microtek] Model Code: 0x66 [microtek] Vendor Name: ' ' Model Name: 'Scanner 600 ' [microtek] Vendor Specific String: 'SCSI F/WV3.4 CTL5380' [microtek] Firmware Rev: '1.91' [microtek] SCSI F/W version: 3.1 Scanner F/W version: 1.3 [microtek] Response data format: 0x01 [microtek] ===== Imaging Capabilities... [microtek] Modes: Lineart Halftone Gray Color (OnePass) [microtek] Resolution Step Sizes: 1% 5% Expanded Resolution Support? yes(but says no) [microtek] Supported Bits Per Sample: 4 8 [microtek] Max. document size code: 0x03 [microtek] Max. document size: 5099 x 7799 pixels [microtek] Frame units: pixels 1/8"'s [microtek] # of built-in halftones: 12 Downloadable patterns? Yes [microtek] Data Compression: [microtek] Contrast Settings: 14 Exposure Settings: 14 [microtek] Adjustable Shadow/Highlight? yes Adjustable Midtone? yes [microtek] Digital brightness/offset? yes [microtek] Gamma Table Size: 1024 entries of 1 bytes (max. depth: 8) [microtek] ===== Source Options... [microtek] Feed type: flatbed ADF support? yes [microtek] Document Feeder Support? yes Feeder Backtracking? yes [microtek] Feeder Installed? yes Feeder Ready? no [microtek] Transparency Adapter Installed? no [microtek] Fast Color Prescan? no [microtek] Selectable Transfer Format? no [microtek] Color Transfer Sequence: line-by-line, non-sequential with headers [microtek] Three pass scan support? yes [microtek] ModeSelect-1 and ModeSense-1 Support? yes [microtek] Can Disable Linearization Table? no [microtek] Can Disable Start-of-Scan Recalibration? yes [microtek] Internal expanded expansion? no [microtek] ====== End of Scanner Inquiry Report ======= [microtek] attach_scanner: happy. [microtek] sane_init: config-> /dev/scanner [microtek] attach_scanner: /dev/scanner [microtek] attach_scanner: opening /dev/scanner [microtek] attach_scanner: open failed [microtek] sane_get_devices device `microtek:iokitscsi@<0158f900000000122670cd53>' is a Microtek ScanMaker E6 flatbed scanner device `microtek:iokitscsi@<0158fb000000001215f2e73d>' is a Microtek ScanMaker E6 flatbed scanner device `microtek:iokitscsi@<015883000000001215646d11>' is a Microtek ScanMaker E6 flatbed scanner device `microtek:iokitscsi@<015885000000001214ced725>' is a Microtek ScanMaker E6 flatbed scanner device `microtek:iokitscsi@<01588d000000001214403c66>' is a Microtek ScanMaker E6 flatbed scanner device `microtek:iokitscsi@<01588f000000001213b2e567>' is a Microtek ScanMaker E6 flatbed scanner device `microtek:iokitscsi@<0158270000000012131e6141>' is a Microtek ScanMaker E6 flatbed scanner device `microtek:iokitscsi@<01582900000000121287b191>' is a Microtek ScanMaker E6 flatbed scanner [microtek] sane_exit... [microtek] sane_exit: MICROTEK says goodbye. goliath:~ sroeper$ scanimage > test.pnm [sanei_debug] Setting debug level of microtek to 255. [microtek] sane_init: MICROTEK says hello! (v0.13.1) [microtek] sane_init: config-> # Uncomment following line to disable "real calibration" routines... [microtek] sane_init: config-> #norealcal [microtek] sane_init: config-> # Uncomment following line to disable "clever precalibration" routines... [microtek] sane_init: config-> #noprecal [microtek] sane_init: config-> # Using "norealcal" will revert backend to pre-0.11.0 calibration code. [microtek] sane_init: config-> scsi * * Scanner [microtek] attach_scanner: iokitscsi@<01582900000000121287b191> [microtek] attach_scanner: opening iokitscsi@<01582900000000121287b191> [microtek] attach_scanner: sending INQUIRY [microtek] id_microtek... [microtek] parse_inquiry... [microtek] parse_inquiry: E6 falsely denies expanded resolution. [microtek] parse_inquiry: E6 falsely denies 1024-byte LUT. [microtek] dump_inquiry... [microtek] === SANE/Microtek backend v0.13.1 === [microtek] ========== Scanner Inquiry Block ========mm [microtek] 06 31 13 01 5b 16 00 00 20 20 20 20 20 20 20 20 [microtek] 53 63 61 6e 6e 65 72 20 36 30 30 20 20 20 20 20 [microtek] 31 2e 39 31 53 43 53 49 20 46 2f 57 56 33 2e 34 [microtek] 20 43 54 4c 35 33 38 30 03 4f 8c c5 03 ee 66 17 [microtek] 00 03 01 00 00 03 00 01 0e 0e 01 05 00 00 00 00 [microtek] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff [microtek] ========== Scanner Inquiry Report ========== [microtek] ===== Scanner ID... [microtek] Device Type Code: 0x06 [microtek] Model Code: 0x66 [microtek] Vendor Name: ' ' Model Name: 'Scanner 600 ' [microtek] Vendor Specific String: 'SCSI F/WV3.4 CTL5380' [microtek] Firmware Rev: '1.91' [microtek] SCSI F/W version: 3.1 Scanner F/W version: 1.3 [microtek] Response data format: 0x01 [microtek] ===== Imaging Capabilities... [microtek] Modes: Lineart Halftone Gray Color (OnePass) [microtek] Resolution Step Sizes: 1% 5% Expanded Resolution Support? yes(but says no) [microtek] Supported Bits Per Sample: 4 8 [microtek] Max. document size code: 0x03 [microtek] Max. document size: 5099 x 7799 pixels [microtek] Frame units: pixels 1/8"'s [microtek] # of built-in halftones: 12 Downloadable patterns? Yes [microtek] Data Compression: [microtek] Contrast Settings: 14 Exposure Settings: 14 [microtek] Adjustable Shadow/Highlight? yes Adjustable Midtone? yes [microtek] Digital brightness/offset? yes [microtek] Gamma Table Size: 1024 entries of 1 bytes (max. depth: 8) [microtek] ===== Source Options... [microtek] Feed type: flatbed ADF support? yes [microtek] Document Feeder Support? yes Feeder Backtracking? yes [microtek] Feeder Installed? yes Feeder Ready? no [microtek] Transparency Adapter Installed? no [microtek] Fast Color Prescan? no [microtek] Selectable Transfer Format? no [microtek] Color Transfer Sequence: line-by-line, non-sequential with headers [microtek] Three pass scan support? yes [microtek] ModeSelect-1 and ModeSense-1 Support? yes [microtek] Can Disable Linearization Table? no [microtek] Can Disable Start-of-Scan Recalibration? yes [microtek] Internal expanded expansion? no [microtek] ====== End of Scanner Inquiry Report ======= [microtek] attach_scanner: happy. [microtek] attach_scanner: iokitscsi@<0158270000000012131e6141> [microtek] attach_scanner: opening iokitscsi@<0158270000000012131e6141> [microtek] attach_scanner: sending INQUIRY [microtek] id_microtek... [microtek] parse_inquiry... [microtek] parse_inquiry: E6 falsely denies expanded resolution. [microtek] parse_inquiry: E6 falsely denies 1024-byte LUT. [microtek] dump_inquiry... [microtek] === SANE/Microtek backend v0.13.1 === [microtek] ========== Scanner Inquiry Block ========mm [microtek] 06 31 13 01 5b 16 00 00 20 20 20 20 20 20 20 20 [microtek] 53 63 61 6e 6e 65 72 20 36 30 30 20 20 20 20 20 [microtek] 31 2e 39 31 53 43 53 49 20 46 2f 57 56 33 2e 34 [microtek] 20 43 54 4c 35 33 38 30 03 4f 8c c5 03 ee 66 17 [microtek] 00 03 01 00 00 03 00 01 0e 0e 01 05 00 00 00 00 [microtek] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff [microtek] ========== Scanner Inquiry Report ========== [microtek] ===== Scanner ID... [microtek] Device Type Code: 0x06 [microtek] Model Code: 0x66 [microtek] Vendor Name: ' ' Model Name: 'Scanner 600 ' [microtek] Vendor Specific String: 'SCSI F/WV3.4 CTL5380' [microtek] Firmware Rev: '1.91' [microtek] SCSI F/W version: 3.1 Scanner F/W version: 1.3 [microtek] Response data format: 0x01 [microtek] ===== Imaging Capabilities... [microtek] Modes: Lineart Halftone Gray Color (OnePass) [microtek] Resolution Step Sizes: 1% 5% Expanded Resolution Support? yes(but says no) [microtek] Supported Bits Per Sample: 4 8 [microtek] Max. document size code: 0x03 [microtek] Max. document size: 5099 x 7799 pixels [microtek] Frame units: pixels 1/8"'s [microtek] # of built-in halftones: 12 Downloadable patterns? Yes [microtek] Data Compression: [microtek] Contrast Settings: 14 Exposure Settings: 14 [microtek] Adjustable Shadow/Highlight? yes Adjustable Midtone? yes [microtek] Digital brightness/offset? yes [microtek] Gamma Table Size: 1024 entries of 1 bytes (max. depth: 8) [microtek] ===== Source Options... [microtek] Feed type: flatbed ADF support? yes [microtek] Document Feeder Support? yes Feeder Backtracking? yes [microtek] Feeder Installed? yes Feeder Ready? no [microtek] Transparency Adapter Installed? no [microtek] Fast Color Prescan? no [microtek] Selectable Transfer Format? no [microtek] Color Transfer Sequence: line-by-line, non-sequential with headers [microtek] Three pass scan support? yes [microtek] ModeSelect-1 and ModeSense-1 Support? yes [microtek] Can Disable Linearization Table? no [microtek] Can Disable Start-of-Scan Recalibration? yes [microtek] Internal expanded expansion? no [microtek] ====== End of Scanner Inquiry Report ======= [microtek] attach_scanner: happy. [microtek] attach_scanner: iokitscsi@<01588f000000001213b2e567> [microtek] attach_scanner: opening iokitscsi@<01588f000000001213b2e567> [microtek] attach_scanner: sending INQUIRY [microtek] id_microtek... [microtek] parse_inquiry... [microtek] parse_inquiry: E6 falsely denies expanded resolution. [microtek] parse_inquiry: E6 falsely denies 1024-byte LUT. [microtek] dump_inquiry... [microtek] === SANE/Microtek backend v0.13.1 === [microtek] ========== Scanner Inquiry Block ========mm [microtek] 06 31 13 01 5b 16 00 00 20 20 20 20 20 20 20 20 [microtek] 53 63 61 6e 6e 65 72 20 36 30 30 20 20 20 20 20 [microtek] 31 2e 39 31 53 43 53 49 20 46 2f 57 56 33 2e 34 [microtek] 20 43 54 4c 35 33 38 30 03 4f 8c c5 03 ee 66 17 [microtek] 00 03 01 00 00 03 00 01 0e 0e 01 05 00 00 00 00 [microtek] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff [microtek] ========== Scanner Inquiry Report ========== [microtek] ===== Scanner ID... [microtek] Device Type Code: 0x06 [microtek] Model Code: 0x66 [microtek] Vendor Name: ' ' Model Name: 'Scanner 600 ' [microtek] Vendor Specific String: 'SCSI F/WV3.4 CTL5380' [microtek] Firmware Rev: '1.91' [microtek] SCSI F/W version: 3.1 Scanner F/W version: 1.3 [microtek] Response data format: 0x01 [microtek] ===== Imaging Capabilities... [microtek] Modes: Lineart Halftone Gray Color (OnePass) [microtek] Resolution Step Sizes: 1% 5% Expanded Resolution Support? yes(but says no) [microtek] Supported Bits Per Sample: 4 8 [microtek] Max. document size code: 0x03 [microtek] Max. document size: 5099 x 7799 pixels [microtek] Frame units: pixels 1/8"'s [microtek] # of built-in halftones: 12 Downloadable patterns? Yes [microtek] Data Compression: [microtek] Contrast Settings: 14 Exposure Settings: 14 [microtek] Adjustable Shadow/Highlight? yes Adjustable Midtone? yes [microtek] Digital brightness/offset? yes [microtek] Gamma Table Size: 1024 entries of 1 bytes (max. depth: 8) [microtek] ===== Source Options... [microtek] Feed type: flatbed ADF support? yes [microtek] Document Feeder Support? yes Feeder Backtracking? yes [microtek] Feeder Installed? yes Feeder Ready? no [microtek] Transparency Adapter Installed? no [microtek] Fast Color Prescan? no [microtek] Selectable Transfer Format? no [microtek] Color Transfer Sequence: line-by-line, non-sequential with headers [microtek] Three pass scan support? yes [microtek] ModeSelect-1 and ModeSense-1 Support? yes [microtek] Can Disable Linearization Table? no [microtek] Can Disable Start-of-Scan Recalibration? yes [microtek] Internal expanded expansion? no [microtek] ====== End of Scanner Inquiry Report ======= [microtek] attach_scanner: happy. [microtek] attach_scanner: iokitscsi@<01588d000000001214403c66> [microtek] attach_scanner: opening iokitscsi@<01588d000000001214403c66> [microtek] attach_scanner: sending INQUIRY [microtek] id_microtek... [microtek] parse_inquiry... [microtek] parse_inquiry: E6 falsely denies expanded resolution. [microtek] parse_inquiry: E6 falsely denies 1024-byte LUT. [microtek] dump_inquiry... [microtek] === SANE/Microtek backend v0.13.1 === [microtek] ========== Scanner Inquiry Block ========mm [microtek] 06 31 13 01 5b 16 00 00 20 20 20 20 20 20 20 20 [microtek] 53 63 61 6e 6e 65 72 20 36 30 30 20 20 20 20 20 [microtek] 31 2e 39 31 53 43 53 49 20 46 2f 57 56 33 2e 34 [microtek] 20 43 54 4c 35 33 38 30 03 4f 8c c5 03 ee 66 17 [microtek] 00 03 01 00 00 03 00 01 0e 0e 01 05 00 00 00 00 [microtek] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff [microtek] ========== Scanner Inquiry Report ========== [microtek] ===== Scanner ID... [microtek] Device Type Code: 0x06 [microtek] Model Code: 0x66 [microtek] Vendor Name: ' ' Model Name: 'Scanner 600 ' [microtek] Vendor Specific String: 'SCSI F/WV3.4 CTL5380' [microtek] Firmware Rev: '1.91' [microtek] SCSI F/W version: 3.1 Scanner F/W version: 1.3 [microtek] Response data format: 0x01 [microtek] ===== Imaging Capabilities... [microtek] Modes: Lineart Halftone Gray Color (OnePass) [microtek] Resolution Step Sizes: 1% 5% Expanded Resolution Support? yes(but says no) [microtek] Supported Bits Per Sample: 4 8 [microtek] Max. document size code: 0x03 [microtek] Max. document size: 5099 x 7799 pixels [microtek] Frame units: pixels 1/8"'s [microtek] # of built-in halftones: 12 Downloadable patterns? Yes [microtek] Data Compression: [microtek] Contrast Settings: 14 Exposure Settings: 14 [microtek] Adjustable Shadow/Highlight? yes Adjustable Midtone? yes [microtek] Digital brightness/offset? yes [microtek] Gamma Table Size: 1024 entries of 1 bytes (max. depth: 8) [microtek] ===== Source Options... [microtek] Feed type: flatbed ADF support? yes [microtek] Document Feeder Support? yes Feeder Backtracking? yes [microtek] Feeder Installed? yes Feeder Ready? no [microtek] Transparency Adapter Installed? no [microtek] Fast Color Prescan? no [microtek] Selectable Transfer Format? no [microtek] Color Transfer Sequence: line-by-line, non-sequential with headers [microtek] Three pass scan support? yes [microtek] ModeSelect-1 and ModeSense-1 Support? yes [microtek] Can Disable Linearization Table? no [microtek] Can Disable Start-of-Scan Recalibration? yes [microtek] Internal expanded expansion? no [microtek] ====== End of Scanner Inquiry Report ======= [microtek] attach_scanner: happy. [microtek] attach_scanner: iokitscsi@<015885000000001214ced725> [microtek] attach_scanner: opening iokitscsi@<015885000000001214ced725> [microtek] attach_scanner: sending INQUIRY [microtek] id_microtek... [microtek] parse_inquiry... [microtek] parse_inquiry: E6 falsely denies expanded resolution. [microtek] parse_inquiry: E6 falsely denies 1024-byte LUT. [microtek] dump_inquiry... [microtek] === SANE/Microtek backend v0.13.1 === [microtek] ========== Scanner Inquiry Block ========mm [microtek] 06 31 13 01 5b 16 00 00 20 20 20 20 20 20 20 20 [microtek] 53 63 61 6e 6e 65 72 20 36 30 30 20 20 20 20 20 [microtek] 31 2e 39 31 53 43 53 49 20 46 2f 57 56 33 2e 34 [microtek] 20 43 54 4c 35 33 38 30 03 4f 8c c5 03 ee 66 17 [microtek] 00 03 01 00 00 03 00 01 0e 0e 01 05 00 00 00 00 [microtek] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff [microtek] ========== Scanner Inquiry Report ========== [microtek] ===== Scanner ID... [microtek] Device Type Code: 0x06 [microtek] Model Code: 0x66 [microtek] Vendor Name: ' ' Model Name: 'Scanner 600 ' [microtek] Vendor Specific String: 'SCSI F/WV3.4 CTL5380' [microtek] Firmware Rev: '1.91' [microtek] SCSI F/W version: 3.1 Scanner F/W version: 1.3 [microtek] Response data format: 0x01 [microtek] ===== Imaging Capabilities... [microtek] Modes: Lineart Halftone Gray Color (OnePass) [microtek] Resolution Step Sizes: 1% 5% Expanded Resolution Support? yes(but says no) [microtek] Supported Bits Per Sample: 4 8 [microtek] Max. document size code: 0x03 [microtek] Max. document size: 5099 x 7799 pixels [microtek] Frame units: pixels 1/8"'s [microtek] # of built-in halftones: 12 Downloadable patterns? Yes [microtek] Data Compression: [microtek] Contrast Settings: 14 Exposure Settings: 14 [microtek] Adjustable Shadow/Highlight? yes Adjustable Midtone? yes [microtek] Digital brightness/offset? yes [microtek] Gamma Table Size: 1024 entries of 1 bytes (max. depth: 8) [microtek] ===== Source Options... [microtek] Feed type: flatbed ADF support? yes [microtek] Document Feeder Support? yes Feeder Backtracking? yes [microtek] Feeder Installed? yes Feeder Ready? no [microtek] Transparency Adapter Installed? no [microtek] Fast Color Prescan? no [microtek] Selectable Transfer Format? no [microtek] Color Transfer Sequence: line-by-line, non-sequential with headers [microtek] Three pass scan support? yes [microtek] ModeSelect-1 and ModeSense-1 Support? yes [microtek] Can Disable Linearization Table? no [microtek] Can Disable Start-of-Scan Recalibration? yes [microtek] Internal expanded expansion? no [microtek] ====== End of Scanner Inquiry Report ======= [microtek] attach_scanner: happy. [microtek] attach_scanner: iokitscsi@<015883000000001215646d11> [microtek] attach_scanner: opening iokitscsi@<015883000000001215646d11> [microtek] attach_scanner: sending INQUIRY [microtek] id_microtek... [microtek] parse_inquiry... [microtek] parse_inquiry: E6 falsely denies expanded resolution. [microtek] parse_inquiry: E6 falsely denies 1024-byte LUT. [microtek] dump_inquiry... [microtek] === SANE/Microtek backend v0.13.1 === [microtek] ========== Scanner Inquiry Block ========mm [microtek] 06 31 13 01 5b 16 00 00 20 20 20 20 20 20 20 20 [microtek] 53 63 61 6e 6e 65 72 20 36 30 30 20 20 20 20 20 [microtek] 31 2e 39 31 53 43 53 49 20 46 2f 57 56 33 2e 34 [microtek] 20 43 54 4c 35 33 38 30 03 4f 8c c5 03 ee 66 17 [microtek] 00 03 01 00 00 03 00 01 0e 0e 01 05 00 00 00 00 [microtek] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff [microtek] ========== Scanner Inquiry Report ========== [microtek] ===== Scanner ID... [microtek] Device Type Code: 0x06 [microtek] Model Code: 0x66 [microtek] Vendor Name: ' ' Model Name: 'Scanner 600 ' [microtek] Vendor Specific String: 'SCSI F/WV3.4 CTL5380' [microtek] Firmware Rev: '1.91' [microtek] SCSI F/W version: 3.1 Scanner F/W version: 1.3 [microtek] Response data format: 0x01 [microtek] ===== Imaging Capabilities... [microtek] Modes: Lineart Halftone Gray Color (OnePass) [microtek] Resolution Step Sizes: 1% 5% Expanded Resolution Support? yes(but says no) [microtek] Supported Bits Per Sample: 4 8 [microtek] Max. document size code: 0x03 [microtek] Max. document size: 5099 x 7799 pixels [microtek] Frame units: pixels 1/8"'s [microtek] # of built-in halftones: 12 Downloadable patterns? Yes [microtek] Data Compression: [microtek] Contrast Settings: 14 Exposure Settings: 14 [microtek] Adjustable Shadow/Highlight? yes Adjustable Midtone? yes [microtek] Digital brightness/offset? yes [microtek] Gamma Table Size: 1024 entries of 1 bytes (max. depth: 8) [microtek] ===== Source Options... [microtek] Feed type: flatbed ADF support? yes [microtek] Document Feeder Support? yes Feeder Backtracking? yes [microtek] Feeder Installed? yes Feeder Ready? no [microtek] Transparency Adapter Installed? no [microtek] Fast Color Prescan? no [microtek] Selectable Transfer Format? no [microtek] Color Transfer Sequence: line-by-line, non-sequential with headers [microtek] Three pass scan support? yes [microtek] ModeSelect-1 and ModeSense-1 Support? yes [microtek] Can Disable Linearization Table? no [microtek] Can Disable Start-of-Scan Recalibration? yes [microtek] Internal expanded expansion? no [microtek] ====== End of Scanner Inquiry Report ======= [microtek] attach_scanner: happy. [microtek] attach_scanner: iokitscsi@<0158fb000000001215f2e73d> [microtek] attach_scanner: opening iokitscsi@<0158fb000000001215f2e73d> [microtek] attach_scanner: sending INQUIRY [microtek] id_microtek... [microtek] parse_inquiry... [microtek] parse_inquiry: E6 falsely denies expanded resolution. [microtek] parse_inquiry: E6 falsely denies 1024-byte LUT. [microtek] dump_inquiry... [microtek] === SANE/Microtek backend v0.13.1 === [microtek] ========== Scanner Inquiry Block ========mm [microtek] 06 31 13 01 5b 16 00 00 20 20 20 20 20 20 20 20 [microtek] 53 63 61 6e 6e 65 72 20 36 30 30 20 20 20 20 20 [microtek] 31 2e 39 31 53 43 53 49 20 46 2f 57 56 33 2e 34 [microtek] 20 43 54 4c 35 33 38 30 03 4f 8c c5 03 ee 66 17 [microtek] 00 03 01 00 00 03 00 01 0e 0e 01 05 00 00 00 00 [microtek] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff [microtek] ========== Scanner Inquiry Report ========== [microtek] ===== Scanner ID... [microtek] Device Type Code: 0x06 [microtek] Model Code: 0x66 [microtek] Vendor Name: ' ' Model Name: 'Scanner 600 ' [microtek] Vendor Specific String: 'SCSI F/WV3.4 CTL5380' [microtek] Firmware Rev: '1.91' [microtek] SCSI F/W version: 3.1 Scanner F/W version: 1.3 [microtek] Response data format: 0x01 [microtek] ===== Imaging Capabilities... [microtek] Modes: Lineart Halftone Gray Color (OnePass) [microtek] Resolution Step Sizes: 1% 5% Expanded Resolution Support? yes(but says no) [microtek] Supported Bits Per Sample: 4 8 [microtek] Max. document size code: 0x03 [microtek] Max. document size: 5099 x 7799 pixels [microtek] Frame units: pixels 1/8"'s [microtek] # of built-in halftones: 12 Downloadable patterns? Yes [microtek] Data Compression: [microtek] Contrast Settings: 14 Exposure Settings: 14 [microtek] Adjustable Shadow/Highlight? yes Adjustable Midtone? yes [microtek] Digital brightness/offset? yes [microtek] Gamma Table Size: 1024 entries of 1 bytes (max. depth: 8) [microtek] ===== Source Options... [microtek] Feed type: flatbed ADF support? yes [microtek] Document Feeder Support? yes Feeder Backtracking? yes [microtek] Feeder Installed? yes Feeder Ready? no [microtek] Transparency Adapter Installed? no [microtek] Fast Color Prescan? no [microtek] Selectable Transfer Format? no [microtek] Color Transfer Sequence: line-by-line, non-sequential with headers [microtek] Three pass scan support? yes [microtek] ModeSelect-1 and ModeSense-1 Support? yes [microtek] Can Disable Linearization Table? no [microtek] Can Disable Start-of-Scan Recalibration? yes [microtek] Internal expanded expansion? no [microtek] ====== End of Scanner Inquiry Report ======= [microtek] attach_scanner: happy. [microtek] attach_scanner: iokitscsi@<0158f900000000122670cd53> [microtek] attach_scanner: opening iokitscsi@<0158f900000000122670cd53> [microtek] attach_scanner: sending INQUIRY [microtek] id_microtek... [microtek] parse_inquiry... [microtek] parse_inquiry: E6 falsely denies expanded resolution. [microtek] parse_inquiry: E6 falsely denies 1024-byte LUT. [microtek] dump_inquiry... [microtek] === SANE/Microtek backend v0.13.1 === [microtek] ========== Scanner Inquiry Block ========mm [microtek] 06 31 13 01 5b 16 00 00 20 20 20 20 20 20 20 20 [microtek] 53 63 61 6e 6e 65 72 20 36 30 30 20 20 20 20 20 [microtek] 31 2e 39 31 53 43 53 49 20 46 2f 57 56 33 2e 34 [microtek] 20 43 54 4c 35 33 38 30 03 4f 8c c5 03 ee 66 17 [microtek] 00 03 01 00 00 03 00 01 0e 0e 01 05 00 00 00 00 [microtek] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff [microtek] ========== Scanner Inquiry Report ========== [microtek] ===== Scanner ID... [microtek] Device Type Code: 0x06 [microtek] Model Code: 0x66 [microtek] Vendor Name: ' ' Model Name: 'Scanner 600 ' [microtek] Vendor Specific String: 'SCSI F/WV3.4 CTL5380' [microtek] Firmware Rev: '1.91' [microtek] SCSI F/W version: 3.1 Scanner F/W version: 1.3 [microtek] Response data format: 0x01 [microtek] ===== Imaging Capabilities... [microtek] Modes: Lineart Halftone Gray Color (OnePass) [microtek] Resolution Step Sizes: 1% 5% Expanded Resolution Support? yes(but says no) [microtek] Supported Bits Per Sample: 4 8 [microtek] Max. document size code: 0x03 [microtek] Max. document size: 5099 x 7799 pixels [microtek] Frame units: pixels 1/8"'s [microtek] # of built-in halftones: 12 Downloadable patterns? Yes [microtek] Data Compression: [microtek] Contrast Settings: 14 Exposure Settings: 14 [microtek] Adjustable Shadow/Highlight? yes Adjustable Midtone? yes [microtek] Digital brightness/offset? yes [microtek] Gamma Table Size: 1024 entries of 1 bytes (max. depth: 8) [microtek] ===== Source Options... [microtek] Feed type: flatbed ADF support? yes [microtek] Document Feeder Support? yes Feeder Backtracking? yes [microtek] Feeder Installed? yes Feeder Ready? no [microtek] Transparency Adapter Installed? no [microtek] Fast Color Prescan? no [microtek] Selectable Transfer Format? no [microtek] Color Transfer Sequence: line-by-line, non-sequential with headers [microtek] Three pass scan support? yes [microtek] ModeSelect-1 and ModeSense-1 Support? yes [microtek] Can Disable Linearization Table? no [microtek] Can Disable Start-of-Scan Recalibration? yes [microtek] Internal expanded expansion? no [microtek] ====== End of Scanner Inquiry Report ======= [microtek] attach_scanner: happy. [microtek] sane_init: config-> /dev/scanner [microtek] attach_scanner: /dev/scanner [microtek] attach_scanner: opening /dev/scanner [microtek] attach_scanner: open failed [microtek] sane_get_devices [microtek] sane_open [microtek] sane_open: find device... [microtek] sane_open: create scanner... [microtek] sane_open: initialize scanner dependent stuff... [microtek] sane_open: Real calibration enabled. [microtek] sane_open: init gamma tables... [microtek] sane_open: init pass-time variables... [microtek] sane_open: init clever cache... [microtek] sane_open: initialize options: [microtek] init_options... [microtek] init_options: quant yes [microtek] init_options: done. [microtek] sane_control_option (opt=0,act=0,val=0xbffffbec,info=0x0) [microtek] sane_control_option (opt=0,act=0,val=0xbffff740,info=0x0) [microtek] sane_get_option_descriptor (0)... [microtek] sane_get_option_descriptor (1)... [microtek] sane_get_option_descriptor (2)... [microtek] sane_get_option_descriptor (3)... [microtek] sane_get_option_descriptor (4)... [microtek] sane_get_option_descriptor (5)... [microtek] sane_get_option_descriptor (6)... [microtek] sane_get_option_descriptor (7)... [microtek] sane_get_option_descriptor (8)... [microtek] sane_get_option_descriptor (9)... [microtek] sane_get_option_descriptor (10)... [microtek] sane_get_option_descriptor (11)... [microtek] sane_get_option_descriptor (12)... [microtek] sane_get_option_descriptor (13)... [microtek] sane_get_option_descriptor (14)... [microtek] sane_control_option (opt=14,act=0,val=0xb34c,info=0x0) [microtek] sane_get_option_descriptor (15)... [microtek] sane_control_option (opt=15,act=0,val=0xb350,info=0x0) [microtek] sane_get_option_descriptor (16)... [microtek] sane_get_option_descriptor (17)... [microtek] sane_get_option_descriptor (18)... [microtek] sane_get_option_descriptor (19)... [microtek] sane_get_option_descriptor (20)... [microtek] sane_get_option_descriptor (21)... [microtek] sane_get_option_descriptor (22)... [microtek] sane_get_option_descriptor (23)... [microtek] sane_get_option_descriptor (24)... [microtek] sane_get_option_descriptor (25)... [microtek] sane_get_option_descriptor (26)... [microtek] sane_get_option_descriptor (27)... [microtek] sane_get_option_descriptor (28)... [microtek] sane_get_option_descriptor (29)... [microtek] sane_get_option_descriptor (30)... [microtek] sane_get_option_descriptor (31)... [microtek] sane_get_option_descriptor (32)... [microtek] sane_get_option_descriptor (33)... [microtek] sane_control_option (opt=12,act=0,val=0xbffff744,info=0x0) [microtek] sane_control_option (opt=13,act=0,val=0xbffff744,info=0x0) [microtek] sane_control_option (opt=12,act=0,val=0xbffffbf0,info=0x0) [microtek] sane_get_option_descriptor (14)... [microtek] sane_control_option (opt=14,act=1,val=0xbffffbf4,info=0xbffff768) [microtek] sane_control_option (opt=13,act=0,val=0xbffffbf0,info=0x0) [microtek] sane_get_option_descriptor (15)... [microtek] sane_control_option (opt=15,act=1,val=0xbffffbf4,info=0xbffff768) [microtek] sane_start... [microtek] sane_get_parameters... [microtek] sane_get_parameters: regular 1-pass color [microtek] sane_get_parameters: res_code = 16 (10) [microtek] bright_r of 0 set to 0x0 [microtek] sane_get_parameters: dots_per_mm: 3.937008 [microtek] sane_get_parameters: units_per_mm: 23.622047 [microtek] WIDTHPIX: before exp: 850 [microtek] sane_get_parameters: lines: 1300 ppl: 850 bpl: 2550 [microtek] .wait_ready 0... [microtek] finagle_precal... [microtek] .compare_mode_sense 0... [microtek] CMS: 0( 0) 64( 0) 8( 0) 4( 0) 7( 0) 7( 0) 0( 0) ff( 0) 80( 0) 7( 0) 7( 0) 0( 0) ff( 0) 80( 0) 7( 0) 7( 0) 0( 0) ff( 0) 80( 0) [microtek] finagle_precal: must precalibrate! [microtek] do_real_calibrate... [microtek] .start_calibrate... [microtek] STCal:11 0 0 0 2 0 1 a [microtek] .get_scan_status 0... [microtek] get_scan_status(0): 0, 0, 0 -> #0 [microtek] > 0 0 0 0 0 0 [microtek] do_real_cal: getting data (max=0) [microtek] ...nleft 12 toget 0 size 0 spot 0 input+spot 0x3065a0 [microtek] .read_scan_data... [microtek] ...nleft 12 toget 0 size 0 spot 0 input+spot 0x3065a0 [microtek] .read_scan_data... [microtek] ...nleft 12 toget 0 size 0 spot 0 input+spot 0x3065a0 [microtek] .read_scan_data... [microtek] ...nleft 12 toget 0 size 0 spot 0 input+spot 0x3065a0 [microtek] .read_scan_data... [microtek] ...nleft 12 toget 0 size 0 spot 0 input+spot 0x3065a0 [microtek] .read_scan_data... ... (will be repeated endless) ... Seems to be a different thing... Any further suggestions ? Thanks, Stefan -----Ursprungliche Nachricht----- Von: Mattias Ellert [mailto:[email protected]] Gesendet: Freitag, 27. Februar 2004 14:43 An: [email protected] Betreff: Re: [sane-devel] Microtek ScanMaker E6 and MacOS X doesnt work Stefan Roper wrote: > Hi, > > i tried the lastest ( Version 1.0.13) sane binary packages on my Mac G4 > with an Adaptec 2906 Scsi card and the Microtek ScanMaker E6. > > The suggested test scan with the command: > $ scanimage -d test:0 > test.pnm > works. > > The command: > $ sane-find-scanner > > # No SCSI scanners found. If you expected something different, make sure > that > # you have loaded a SCSI driver for your SCSI adapter. > > # No USB scanners found. If you expected something different, make sure that > # you have loaded a driver for your USB host controller and have installed a > # kernel scanner module. > > # Scanners connected to the parallel port or other proprietary ports > can't be > # detected by this program. > > # You may want to run this program as root to find all devices. Once you > # found the scanner devices, be sure to adjust access permissions as > # necessary. > > doesn't find anything, which may be ok because the Mac has no > /dev/scanner device. > > So i tried the next command: > $ scanimage -L > device `microtek:iokitscsi@<015909000000000f0137c50b>' is a Microtek > ScanMaker E6 flatbed scanner > device `microtek:iokitscsi@<01590b000000000e2c5655a3>' is a Microtek > ScanMaker E6 flatbed scanner > device `microtek:iokitscsi@<015893000000000e2bc9b882>' is a Microtek > ScanMaker E6 flatbed scanner > device `microtek:iokitscsi@<015895000000000e2b39b540>' is a Microtek > ScanMaker E6 flatbed scanner > device `microtek:iokitscsi@<01589d000000000e2aa2e3dc>' is a Microtek > ScanMaker E6 flatbed scanner > device `microtek:iokitscsi@<01589f000000000e2a0de2fe>' is a Microtek > ScanMaker E6 flatbed scanner > device `microtek:iokitscsi@<015837000000000e2984a549>' is a Microtek > ScanMaker E6 flatbed scanner > device `microtek:iokitscsi@<015839000000000e28f1ee11>' is a Microtek > ScanMaker E6 flatbed scanner > > Looks like there is a scanner detected, but why 8 times ? > > An scanimage > test.pnm doesn't work, the scanner starts, but then the > process hangs. After killing the process, the mac sometimes hangs. > > Any suggestions for me ? > > Thanks in advance, > Stefan Activate debugging of the backend: for bash: SANE_DEBUG_MICROTEK=255 scanimage > test.pnm for tcsh: (setenv SANE_DEBUG_MICROTEK 255; scanimage > test.pnm) Most probable cause for failure in the microtek backend is: [microtek] sane_start: SCSI buffer smaller that one scan line! [microtek] end_scan... [microtek] .stop_scan... If this is the case for you, please try the suggested patch on http://www.ellert.se/twain-sane/patches.html (Whenever I get back to Uppsala I will create a new set of packages...) Mattias -- ________________________________________________________________________ [email protected] tel: +46 18 471 32 58 http://www.tsl.uu.se/~ellert/ fax: +46 18 471 35 13 ________________________________________________________________________
