This is a multi-part message in MIME format. --------------060504090603000306070403 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello List, I've tryed to get a Microtek ScanMaker 35t+ to work with my Debian Linux-Box. At first I've tryed it with Sane 1.0.7, an adaptec 3940 Controller and Kernel 2.4.24 with aic7xxx driver compiled in. After that I've tryed it with Sane 1.0.13. Then I changed the Controller to an Adaptec 2940AU (aic7860) but the Problem is still the same. If I try to scan, I get the following SCSI-Error: kernel: scsi0:0:6:0: Attempting to queue a TARGET RESET message kernel: CDB: 0x55 0x0 0x27 0x0 0x0 0x0 0x0 0x8 0x0 0x1 kernel: scsi0:0:6:0: Command not found kernel: aic7xxx_dev_reset returns 0x2002 kernel: scsi: device set offline - not ready or command retry failed after bus reset: host 0 channel 0 id 6 lun 0 kernel: Device not ready. Make sure there is a disc in the drive. After that, the scanner is not accessible anymore. I have to use the tool scsiadd to remove it from the list of SCSI-devices and after that rescan the Bus to produce the errormessage above again. A reboot do the same. I have put SANE_DEBUG_MICROTEK to 128, and try to get debug-output with the commandline: scanimage -d microtek:/dev/sg2 -T 2>scanner-test.txt the resulting message is in attachment. The scanner is working with MacOS 8 so I think hardware is OK. The scanner is one of 3 devices. One yamaha 4260 CD-Burner internaly, an AGFA SnapScan as first device in extern-chain, and the Microtek as the last device. Do anyone on this list know how to get this scanner to work? Regards, Hubert -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (Darwin) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFAgk8BFUpf3meJP54RAnWKAJ4jKGd8bqaK1u+O0cm/EPr52kZSxACgnRlJ zqVf9pLj07gWLQkDijFBxyo= =MSN+ -----END PGP SIGNATURE----- --------------060504090603000306070403 Content-Type: text/plain; x-mac-type="0"; x-mac-creator="0"; name="scanner-test.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="scanner-test.txt" [sanei_debug] Setting debug level of microtek to 128. [microtek] sane_init: MICROTEK says hello! (v0.13.1) [microtek] sane_init: config-> # Uncomment following line to disable "real calibration" routines... [microtek] sane_init: config-> # norealcal [microtek] sane_init: config-> # Uncomment following line to disable "clever precalibration" routines... [microtek] sane_init: config-> # noprecal [microtek] sane_init: config-> # Using "norealcal" will revert backend to pre-0.11.0 calibration code. [microtek] sane_init: config-> scsi MICROTEK * * * * * * [microtek] attach_scanner: /dev/sg2 [microtek] attach_scanner: opening /dev/sg2 [microtek] attach_scanner: sending INQUIRY [microtek] id_microtek... [microtek] parse_inquiry... [microtek] parse_inquiry: Not an E6 -- pretend recal cannot be disabled. [microtek] dump_inquiry... [microtek] === SANE/Microtek backend v0.13.1 === [microtek] ========== Scanner Inquiry Block ========mm [microtek] 06 31 19 01 5b 00 00 00 4d 49 43 52 4f 54 45 4b [microtek] 53 63 61 6e 4d 61 6b 65 72 20 33 35 74 2b 20 20 [microtek] 31 2e 36 30 53 43 53 49 20 46 2f 57 56 33 2e 34 [microtek] 20 43 54 4c 35 33 38 30 03 ef 8c c2 80 ec 62 23 [microtek] 01 03 23 01 00 83 00 01 0e 0e 01 05 00 00 00 00 [microtek] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff [microtek] ========== Scanner Inquiry Report ========== [microtek] ===== Scanner ID... [microtek] Device Type Code: 0x06 [microtek] Model Code: 0x62 [microtek] Vendor Name: 'MICROTEK' Model Name: 'ScanMaker 35t+ ' [microtek] Vendor Specific String: 'SCSI F/WV3.4 CTL5380' [microtek] Firmware Rev: '1.60' [microtek] SCSI F/W version: 3.1 Scanner F/W version: 1.9 [microtek] Response data format: 0x01 [microtek] ===== Imaging Capabilities... [microtek] Modes: Lineart Halftone Gray Color (X-msv) (OnePass) (Negative) [microtek] Resolution Step Sizes: 1% 5% Expanded Resolution Support? yes [microtek] Supported Bits Per Sample: 4 8 [microtek] Max. document size code: 0x80 [microtek] Max. document size: 2686 x 2686 pixels [microtek] Frame units: pixels 1/8"'s [microtek] # of built-in halftones: 12 Downloadable patterns? Yes [microtek] Data Compression: [microtek] Contrast Settings: 14 Exposure Settings: 14 [microtek] Adjustable Shadow/Highlight? yes Adjustable Midtone? yes [microtek] Digital brightness/offset? yes [microtek] Gamma Table Size: 1024 entries of 2 bytes (max. depth: 10) [microtek] ===== Source Options... [microtek] Feed type: edge-feed ADF support? no [microtek] Document Feeder Support? yes Feeder Backtracking? yes [microtek] Feeder Installed? no Feeder Ready? no [microtek] Transparency Adapter Installed? no [microtek] Fast Color Prescan? yes [microtek] Selectable Transfer Format? no [microtek] Color Transfer Sequence: line-by-line, non-sequential with headers [microtek] Three pass scan support? no [microtek] ModeSelect-1 and ModeSense-1 Support? yes [microtek] Can Disable Linearization Table? no [microtek] Can Disable Start-of-Scan Recalibration? no [microtek] Internal expanded expansion? no [microtek] ====== End of Scanner Inquiry Report ======= [microtek] attach_scanner: happy. [microtek] sane_init: config-> # /dev/sg1 [microtek] sane_open [microtek] sane_open: find device... [microtek] sane_open: create scanner... [microtek] sane_open: initialize scanner dependent stuff... [microtek] sane_open: All calibration routines disabled. [microtek] sane_open: init gamma tables... [microtek] sane_open: init pass-time variables... [microtek] sane_open: init clever cache... [microtek] sane_open: initialize options: [microtek] init_options... [microtek] init_options: quant yes [microtek] init_options: done. [microtek] sane_control_option (opt=0,act=0,val=0xbfffeb0c,info=(nil)) [microtek] sane_control_option (opt=0,act=0,val=0xbfffea88,info=(nil)) [microtek] sane_get_option_descriptor (0)... [microtek] sane_get_option_descriptor (1)... [microtek] sane_get_option_descriptor (2)... [microtek] sane_get_option_descriptor (3)... [microtek] sane_get_option_descriptor (4)... [microtek] sane_get_option_descriptor (5)... [microtek] sane_get_option_descriptor (6)... [microtek] sane_get_option_descriptor (7)... [microtek] sane_get_option_descriptor (8)... [microtek] sane_get_option_descriptor (9)... [microtek] sane_get_option_descriptor (10)... [microtek] sane_get_option_descriptor (11)... [microtek] sane_get_option_descriptor (12)... [microtek] sane_get_option_descriptor (13)... [microtek] sane_get_option_descriptor (14)... [microtek] sane_control_option (opt=14,act=0,val=0x8050438,info=(nil)) [microtek] sane_get_option_descriptor (15)... [microtek] sane_control_option (opt=15,act=0,val=0x805043c,info=(nil)) [microtek] sane_get_option_descriptor (16)... [microtek] sane_get_option_descriptor (17)... [microtek] sane_get_option_descriptor (18)... [microtek] sane_get_option_descriptor (19)... [microtek] sane_get_option_descriptor (20)... [microtek] sane_get_option_descriptor (21)... [microtek] sane_get_option_descriptor (22)... [microtek] sane_get_option_descriptor (23)... [microtek] sane_get_option_descriptor (24)... [microtek] sane_get_option_descriptor (25)... [microtek] sane_get_option_descriptor (26)... [microtek] sane_get_option_descriptor (27)... [microtek] sane_get_option_descriptor (28)... [microtek] sane_get_option_descriptor (29)... [microtek] sane_get_option_descriptor (30)... [microtek] sane_get_option_descriptor (31)... [microtek] sane_get_option_descriptor (32)... [microtek] sane_get_option_descriptor (33)... [microtek] sane_control_option (opt=12,act=0,val=0xbfffea84,info=(nil)) [microtek] sane_control_option (opt=13,act=0,val=0xbfffea84,info=(nil)) [microtek] sane_control_option (opt=12,act=0,val=0xbfffeb08,info=(nil)) [microtek] sane_get_option_descriptor (14)... [microtek] sane_control_option (opt=14,act=1,val=0xbfffeb04,info=0xbfffea84) [microtek] sane_control_option (opt=13,act=0,val=0xbfffeb08,info=(nil)) [microtek] sane_get_option_descriptor (15)... [microtek] sane_control_option (opt=15,act=1,val=0xbfffeb04,info=0xbfffea84) [microtek] sane_start... [microtek] sane_get_parameters... [microtek] sane_get_parameters: regular 1-pass color [microtek] sane_get_parameters: res_code = 5 ( 5) [microtek] bright_r of 0 set to 0x0 [microtek] sane_get_parameters: dots_per_mm: 3.937008 [microtek] sane_get_parameters: units_per_mm: 76.771654 [microtek] WIDTHPIX: before exp: 136 [microtek] sane_get_parameters: lines: 137 ppl: 136 bpl: 408 [microtek] .wait_ready 3... [microtek] finagle_precal... [microtek] .scanning_frame... [microtek] .scanning_frame: in- 0,0 2686,2686 [microtek] .scanning_frame: out- 0,0 2686,2686 [microtek] .accessory... [microtek] .download_gamma... [microtek] .download_gamma: 1024 entries of 2 bytes, max 255 [microtek] .download_gamma: by default [microtek] SENSE! fd = 3 [microtek] sense = 83 00 04 00. [microtek] sense: ERR_ILLTABLE [microtek] end_scan... scanimage: sane_start: Error during device I/O [microtek] sane_cancel... [microtek] end_scan... [microtek] sane_close... [microtek] sane_exit... [microtek] sane_exit: MICROTEK says goodbye. --------------060504090603000306070403--
