Hi On 9/17/05, Lauri Pirttiaho <[email protected]> wrote: > Hello, > > Some months ago I posted some queries about CanoScan > 3200F, and it appeared there is no project going on. > As announced then, I have been working on it and the > preliminary results indicate that the scanner is > controlled by ALi M5623, for which there is no backend. > > It appears that the same chip with same firmware is > used in Medion 6190 and Primax Colorado 1200u. > The firmware can emit vendor/device ID pairs: > 0x0461/0x037B -- Primax/Medion 6190 > 0x0461/0x037C -- Primax unknown model > 0x0461/0x037D -- Primax unknown model > 0x04A7/0x0361 -- Visoneer/Primax Colorado 1200u > 0x04A7/0x0362 -- Visoneer unknown model > 0x04A9/0x2216 -- Canon/CanoScan 3200F > > Looks like Martin Haag is working on Medion 6190 but > the www page ends at requesting infor from manufacturer. > Yes the Medion 6190 uses ALI M5623 an identifies itself as a Primax Colorado 1200u
I contacted the Medion group but got no response yet. And since the ALI Corporation website says this : (quote) Datasheets are only available to ALi's development partners and customers who have signed non-disclosure agreements. Unfortunately, datasheets cannot be provided to end-users. ALi will review requests from other developers and grant them on a case-by-case basis (/quote) I will probably get no information at all. > Now, if there are other projects on this chip, I would like > to hear about. If not, I will continue working on this > and keep you posted when I get some more out of it. The next step I've planned is to acquire some USB loggs from a different OS. Maybe next weekend. > > Best regards, > > Lauri Pirttiaho > Oulu > Finland > > (..) cya Martin Haag -- http://mibix.de mailto:[email protected]
