Hello, Martin Haag on Sun Sep 18 12:12:53 UTC 2005 >Hi > >On 9/17/05, Lauri Pirttiaho <lauri.pirttiaho at luukku.com> wrote: >> ... >> Looks like Martin Haag is working on Medion 6190 but >> the www page ends at requesting infor from manufacturer. >> >Yes the Medion 6190 uses ALI M5623 an identifies itself as a Primax >Colorado 1200u > >I contacted the Medion group but got no response yet. > >And since the ALI Corporation website says this : > >(quote) >Datasheets are only available to ALi's development partners and >customers who have signed non-disclosure agreements. Unfortunately, >datasheets cannot be provided to end-users. ALi will review requests >from other developers and grant them on a case-by-case basis >(/quote) > >I will probably get no information at all.
That was what I noticed also. I got one reply from Canon imaging, that they would forward my request to some people knowing about the scanners, but have not heard anything since. Also S&Q remains silent (I suspect ALi M5623 has some connections to SQ113C but I have no logs from a scanner containing that chip so I can't be sure.) >The next step I've planned is to acquire some USB loggs from a different OS. >Maybe next weekend. Could you, Martin, please check the boot sequence of the Medion scanner. Just start a snooper and plug in the scanner. Does the Medion driver also upload a firmware update? If so, I would like to take a look at that version, too. I have Canon version decompiled (manually, which took me three months to do, about one hour per day that I could spend on it) and I am now figuring out the command interface parameters. >cya >Martin Haag Best regards, Lauri Pirttiaho Oulu Finland ................................................................... Luukku Plus paketilla p??set eroon tila- ja turvallisuusongelmista. Hanki Luukku Plus ja helpotat el?m??si. http://www.mtv3.fi/luukku
