well, you are the first person to report having one, so you are going to have to provide whatever extra info there is :) as root:
SANE_DEBUG_FUJITSU=30 scanimage --help 2>fi60.log and send me fi60.log directly. btw- you have doppler misspelled several times on your website... allan On 5/7/07, Rob Shortt <[email protected]> wrote: > Hello, > > We have a Fujitsu fi-60F scanner that we would very much like to have > working in linux. This is a small document (A6) flatbed scanner and I > believe is the only one of its kind. > > The system I'm testing on is FC5 with kernel 2.6.20 with SANE 1.0.18. > > The product ID for this device is 0x10c7. I added this to > /etc/sane.d/fujitsu.conf: > > #fi-60F > usb 0x04c5 0x10c7 > > Running sane-find-scanner shows: > > found USB scanner (vendor=0x04c5, product=0x10c7) at libusb:001:004 > # Your USB scanner was (probably) detected. It may or may not be > supported by > # SANE. Try scanimage -L and read the backend's manpage. > > > However, scanimage -L reports that no scaners were identified (even with > -d libusb:001:004). > > I have tried the scanDoX fujitsu driver and that doesn't work either. I > would rather an open source solution anyways. > > According to the comments here > http://www.sane-project.org/sane-mfgs.html#Z-FUJITSU the fi-60F is: > "untested - workgroup, current, unknown chipset, perhaps non-fujitsu". > Does anyone have some insight on this device? What should my next step > be in supporting this scanner? > > Thanks, > -Rob > > > -- > sane-devel mailing list: [email protected] > http://lists.alioth.debian.org/mailman/listinfo/sane-devel > Unsubscribe: Send mail with subject "unsubscribe your_password" > to [email protected] > -- "The truth is an offense, but not a sin"
