Hi all, I have purchased a Subj. This model is new one and not supported by SANE yet but I hope it's similar to Epson Perfection 3490/3590. Output of "sane-find scanner -v -v" is attached. I'm not a hardware programmer, is any from driver developers who help me? I'm ready to provide any information concernig the scanner. Thank you in advance.
__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com -------------- next part -------------- This is sane-find-scanner from sane-backends 1.0.18 # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. searching for SCSI scanners: checking /dev/scanner... failed to open (Invalid argument) checking /dev/sg0... failed to open (Invalid argument) checking /dev/sg1... failed to open (Invalid argument) checking /dev/sg2... open ok inquiry for device /dev/sg2 failed (Device busy) checking /dev/sg3... failed to open (Invalid argument) checking /dev/sg4... failed to open (Invalid argument) checking /dev/sg5... failed to open (Invalid argument) checking /dev/sg6... failed to open (Invalid argument) checking /dev/sg7... failed to open (Invalid argument) checking /dev/sg8... failed to open (Invalid argument) checking /dev/sg9... failed to open (Invalid argument) checking /dev/sga... failed to open (Invalid argument) checking /dev/sgb... failed to open (Invalid argument) checking /dev/sgc... open ok inquiry for device /dev/sgc failed (Device busy) checking /dev/sgd... failed to open (Invalid argument) checking /dev/sge... failed to open (Invalid argument) checking /dev/sgf... failed to open (Invalid argument) checking /dev/sgg... failed to open (Invalid argument) checking /dev/sgh... failed to open (Invalid argument) checking /dev/sgi... failed to open (Invalid argument) checking /dev/sgj... failed to open (Invalid argument) checking /dev/sgk... failed to open (Invalid argument) checking /dev/sgl... failed to open (Invalid argument) checking /dev/sgm... failed to open (Invalid argument) checking /dev/sgn... failed to open (Invalid argument) checking /dev/sgo... failed to open (Invalid argument) checking /dev/sgp... failed to open (Invalid argument) checking /dev/sgq... failed to open (Invalid argument) checking /dev/sgr... failed to open (Invalid argument) checking /dev/sgs... failed to open (Invalid argument) checking /dev/sgt... failed to open (Invalid argument) checking /dev/sgu... failed to open (Invalid argument) checking /dev/sgv... failed to open (Invalid argument) checking /dev/sgw... failed to open (Invalid argument) checking /dev/sgx... failed to open (Invalid argument) checking /dev/sgy... failed to open (Invalid argument) checking /dev/sgz... failed to open (Invalid argument) # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. searching for USB scanners: checking /dev/usb/scanner... failed to open (Invalid argument) checking /dev/usb/scanner0... failed to open (Invalid argument) checking /dev/usb/scanner1... failed to open (Invalid argument) checking /dev/usb/scanner2... failed to open (Invalid argument) checking /dev/usb/scanner3... failed to open (Invalid argument) checking /dev/usb/scanner4... failed to open (Invalid argument) checking /dev/usb/scanner5... failed to open (Invalid argument) checking /dev/usb/scanner5... failed to open (Invalid argument) checking /dev/usb/scanner7... failed to open (Invalid argument) checking /dev/usb/scanner8... failed to open (Invalid argument) checking /dev/usb/scanner9... failed to open (Invalid argument) checking /dev/usb/scanner10... failed to open (Invalid argument) checking /dev/usb/scanner11... failed to open (Invalid argument) checking /dev/usb/scanner12... failed to open (Invalid argument) checking /dev/usb/scanner13... failed to open (Invalid argument) checking /dev/usb/scanner14... failed to open (Invalid argument) checking /dev/usb/scanner15... failed to open (Invalid argument) checking /dev/usbscanner... open ok, but vendor and product could NOT be identified found USB scanner (UNKNOWN vendor and product) at device /dev/usbscanner checking /dev/usbscanner0... failed to open (Invalid argument) checking /dev/usbscanner1... failed to open (Invalid argument) checking /dev/usbscanner2... failed to open (Invalid argument) checking /dev/usbscanner3... failed to open (Invalid argument) checking /dev/usbscanner4... failed to open (Invalid argument) checking /dev/usbscanner5... failed to open (Invalid argument) checking /dev/usbscanner6... failed to open (Invalid argument) checking /dev/usbscanner7... failed to open (Invalid argument) checking /dev/usbscanner8... failed to open (Invalid argument) checking /dev/usbscanner9... failed to open (Invalid argument) checking /dev/usbscanner10... failed to open (Invalid argument) checking /dev/usbscanner11... failed to open (Invalid argument) checking /dev/usbscanner12... failed to open (Invalid argument) checking /dev/usbscanner13... failed to open (Invalid argument) checking /dev/usbscanner14... failed to open (Invalid argument) checking /dev/usbscanner15... failed to open (Invalid argument) trying libusb: <device descriptor of 0x0000/0x0000 at 004:001 (Linux 2.4.29 ehci_hcd Intel Corp. 82801DB USB2)> bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 bDeviceSubClass 0 bDeviceProtocol 1 bMaxPacketSize0 8 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.04 iManufacturer 3 (Linux 2.4.29 ehci_hcd) iProduct 2 (Intel Corp. 82801DB USB2) iSerialNumber 1 (00:1d.7) bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 64 (Self-powered) MaxPower 0 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 3 (interrupt) wMaxPacketSize 2 bInterval 12 ms bRefresh 0 bSynchAddress 0 <device descriptor of 0x04b8/0x012d at 004:009 (EPSON EPSON Scanner)> bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 bDeviceSubClass 255 bDeviceProtocol 255 bMaxPacketSize0 64 idVendor 0x04B8 idProduct 0x012D bcdDevice 1.00 iManufacturer 1 (EPSON) iProduct 2 (EPSON Scanner) iSerialNumber 0 () bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 192 (Self-powered) MaxPower 2 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 bInterfaceSubClass 255 bInterfaceProtocol 255 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 2 (bulk) wMaxPacketSize 512 bInterval 255 ms bRefresh 0 bSynchAddress 0 <endpoint 1> bLength 7 bDescriptorType 5 bEndpointAddress 0x02 (out 0x02) bmAttributes 2 (bulk) wMaxPacketSize 512 bInterval 255 ms bRefresh 0 bSynchAddress 0 <trying to find out which USB chip is used> checking for GT-6801 ... this is not a GT-6801 (bcdUSB = 0x200) checking for GT-6816 ... this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255) checking for GT-8911 ... this is not a GT-8911 (check 1, bDeviceClass = 255, bInterfaceClass = 255) checking for MA-1017 ... this is not a MA-1017 (bDeviceClass = 255, bInterfaceClass = 255) checking for MA-1015 ... this is not a MA-1015 (bcdUSB = 0x200) checking for MA-1509 ... this is not a MA-1509 (bcdUSB = 0x200) checking for LM983[1,2,3] ... this is not a LM983x (bcdUSB = 0x200) checking for GL646 ... this is not a GL646 (bDeviceClass = 255, bInterfaceClass = 255) checking for GL646_HP ... this is not a GL646_HP (bcdUSB = 0x200) checking for GL660+GL646 ... this is not a GL660+GL646 (bDeviceClass = 255, bInterfaceClass = 255) checking for GL841 ... this is not a GL841 (bNumEndpoints = 2) checking for ICM532B ... this is not a ICM532B (check 2, bcdUSB = 0x200) checking for PV8630/LM9830 ... this is not a PV8630/LM9830 (bDeviceClass = 255) checking for M011 ... this is not a M011 (bcdUSB = 0x200) checking for RTS8822L-01H ... this is not a RTS8822L-01H (bDeviceClass = 255) checking for rts8858c ... this is not a rts8858c (bDeviceClass = 255) checking for SQ113 ... this is not a SQ113 (bDeviceClass = 255) <Couldn't determine the type of the USB chip (result from sane-backends 1.0.18)> found USB scanner (vendor=0x04b8 [EPSON], product=0x012d [EPSON Scanner]) at libusb:004:009 <device descriptor of 0x0000/0x0000 at 003:001 ()> bLength 18 bDescriptorType 1 bcdUSB 1.00 bDeviceClass 9 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0000 idProduct 0x0000 bcdDevice 0.00 iManufacturer 0 () iProduct 2 () iSerialNumber 1 () bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 64 (Self-powered) MaxPower 0 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 3 (interrupt) wMaxPacketSize 8 bInterval 255 ms bRefresh 0 bSynchAddress 0 <device descriptor of 0x0000/0x0000 at 002:001 ()> bLength 18 bDescriptorType 1 bcdUSB 1.00 bDeviceClass 9 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0000 idProduct 0x0000 bcdDevice 0.00 iManufacturer 0 () iProduct 2 () iSerialNumber 1 () bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 64 (Self-powered) MaxPower 0 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 3 (interrupt) wMaxPacketSize 8 bInterval 255 ms bRefresh 0 bSynchAddress 0 <device descriptor of 0x0000/0x0000 at 001:001 ()> bLength 18 bDescriptorType 1 bcdUSB 1.00 bDeviceClass 9 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0000 idProduct 0x0000 bcdDevice 0.00 iManufacturer 0 () iProduct 2 () iSerialNumber 1 () bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 64 (Self-powered) MaxPower 0 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 3 (interrupt) wMaxPacketSize 8 bInterval 255 ms bRefresh 0 bSynchAddress 0 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # `UNKNOWN vendor and product' means that there seems to be a scanner at this # device file but the vendor and product ids couldn't be identified. # Currently identification only works with Linux versions >= 2.4.8. You may # need to configure your backend manually, see the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. done From [email protected] Fri Oct 6 05:43:21 2006 From: [email protected] (Olaf Meeuwissen) Date: Fri Oct 6 05:44:08 2006 Subject: [sane-devel] Epson Perfection V100 In-Reply-To: <[email protected]> (Alexandre Averyanov's message of "Thu, 5 Oct 2006 22:18:12 -0700 (PDT)") References: <[email protected]> Message-ID: <[email protected]> Alexandre Averyanov <[email protected]> writes: > I have purchased a Subj. This model is new one and not > supported by SANE yet but I hope it's similar to > Epson Perfection 3490/3590. It is not. > Output of "sane-find scanner -v -v" is attached. I'm > not a hardware programmer, is any from driver > developers who help me? I'm ready to provide any > information concernig the scanner. Thank you in > advance. Take a look at: http://www.avasys.jp/english/linux_e/index.html and find that Image Scan! for Linux 2.3.0 adds support for this model. Note: you will need a binary-only non-free plugin for this to work. For those who are curious, here is the blurb from the NEWS file for the last few releases. As you can see, the Perfection V10 and V100 PHOTO were already added in 2.1.1 but the plugins were not publicly released until 2.3.0. It's a loooong story ;-) ---------------------------------------------------------------------- iscan-2.3.0 (2006-09-11) ---------------------------------------------------------------------- * adds support for the following scanners: - GT-F650 - GT-F700 (AFL not supported) - GT-S600 - PM-A820 - PM-A920 - PM-A970 - PX-A720 - Perfection V350 PHOTO (AFL not supported) - Stylus CX3900 - Stylus CX4900 - Stylus CX5000 - Stylus CX5900 - Stylus CX6000 - Stylus DX4000 - Stylus DX5000 - Stylus DX6000 ---------------------------------------------------------------------- iscan-2.2.0 (2006-08-11) ---------------------------------------------------------------------- * adds support for the following scanners: - ES-H300 - GT-2500 - ME200 - Stylus CX2800 - Stylus CX2900 ---------------------------------------------------------------------- iscan-2.1.1 (2006-08-10) ---------------------------------------------------------------------- * adds support for the following scanners: - Perfection V10 - Perfection V100 PHOTO Hope this helps, -- Olaf Meeuwissen EPSON AVASYS Corporation, SE1 FSF Associate Member #1962 sign up at http://member.fsf.org/ GnuPG key: 6BE37D90/AB6B 0D1F 99E7 1BF5 EB97 976A 16C7 F27D 6BE3 7D90 Penguin's lib! -- I hack, therefore I am -- LPIC-2
