Hi Louis, Am 18.05.2015 um 20:07 schrieb Louis Lagendijk: > On Sun, 2015-05-17 at 20:03 +0200, Kai T. Hillmann wrote: >> Hi, >> >> first of all thanks for a great piece of software. >> >> Sorry for posting this additionally to the mailinglist (i posted the >> same before in irc but it seems that this will take a longer time and >> i've no bnc there - and don't want to miss some answers) >> >> I recently tried to use the newest sane versions from git after i >> realized that the adf empty bug should be fixed using Rolf Bench's ppa >> which was working very good on an xubuntu trusty. >> >> After that i wanted to use the same on my cubietruck debian jessy armhf >> host... so i had to compile it myself no problem done and with >> >> scanimage -vL >> >> -> my scanner was found... >> >> but scanimage -T failed with: >> >> "open of device pixma:MX870_mx870 failed: Operation was cancelled" >> >> After a lot of tests (created a new trusty vm and compiled sane manually >> as well to see whether it works there and it worked as expected, >> different recompiles on cubietruck but nothing works) i've found a >> possibility to give out some debug informations - output here: >> >> http://pastebin.com/MTM3L06x >> >> The configuration of the compilation is here: >> http://pastebin.com/9dnU7LVB >> >> Output of scanimage -V : scanimage (sane-backends) 1.0.25git; backend >> version 1.0.25 >> >> The uname of the kernel: >> >> Linux myhostname 3.16.0-4-armmp-lpae #1 SMP Debian 3.16.7-ckt9-3~deb8u1 >> (2015-04-24) armv7l GNU/Linux >> >> Git-Version of sane: >> >> 980b4f6b065a411faf7eb538b3928bdc3308f2ca >> >> Does anyone have any ideas? >> > ould you try to scan using USB first? The networking code uses the USB > code but adds a network stack to the USB interface. Therefore check > first if the device works over USB. If USB fails get the USB debug > information by setting SANE_DEBUG_PIXMA=11. > If USB works, but network scanning does not, please provide a debugfile > generated with SANE_DEBUG_BJNP=3.
http://pastebin.com/sQGFxprj is the debugfile with SANE_DEBUG_BJNP=3 > For details see man sane-pixma. If only netowrked scans fail, also check > the firewalling chapter in that man -page. For testing i switched off the firewall completely so this can't be the problem: iptables-save # Generated by iptables-save v1.4.21 on Mon May 18 20:49:35 2015 *filter :INPUT ACCEPT [605:46294] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [384:41518] COMMIT # Completed on Mon May 18 20:49:35 2015 Kind regards, Kai > > > > Kind regards, Louis > > > -- sane-devel mailing list: [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to [email protected]
