Did you select "remote scanner" on the front panel of the device? Otherwise I get the timeouts as well on my mf8230
/Troels 2016-02-26 18:57 GMT+01:00 Wilfred - hotmail <[email protected]>: > Hi All, > > I am trying to get my Canon i-sensys MF8350cdn scanner working over my > network, but without luck so far. I have also a HP officejet connect to the > network and that is picked up well. > I get the following output when I run scanimage -L in the debugging mode. > > ~ $ env SANE_DEBUG_BJNP="5" scanimage -L > [sanei_debug] Setting debug level of bjnp to 5. > [bjnp] sanei_bjnp_find_devices, pixma backend version: 0.17.26 > [bjnp] sanei_bjnp_find_devices: Adding scanner from pixma.conf: > mfnp://192.168.1.154 > [bjnp] bjnp_allocate_device(mfnp://192.168.1.154) 0 > [bjnp] get_scanner_name: Forward lookup for Canon385e6f.Workgroup succeeded, > using as hostname > [bjnp] setup_udp_socket: Setting up a UDP socket, dest: 192.168.1.154 port > 8610 > [bjnp] udp_command: ERROR - select failed: timed out > [bjnp] udp_command: ERROR - select failed: timed out > [bjnp] udp_command: ERROR - select failed: timed out > [bjnp] udp_command: ERROR - no data received > [bjnp] bjnp_init_device_structure: Cannot read mac address, skipping this > scanner > [bjnp] bjnp_allocate_device: Scanner not yet in our list, added it: > 192.168.1.154:8610 > [bjnp] get_scanner_id: Get scanner identity > [bjnp] 00000000:4d 46 4e 50 02 30 00 00 00 01 00 00 00 00 00 00 > [bjnp] setup_udp_socket: Setting up a UDP socket, dest: 192.168.1.154 port > 8610 > [bjnp] udp_command: ERROR - select failed: timed out > [bjnp] udp_command: ERROR - select failed: timed out > [bjnp] udp_command: ERROR - select failed: timed out > [bjnp] udp_command: ERROR - no data received > [bjnp] get_scanner_id: ERROR - Failed to retrieve scanner identity: > [bjnp] add_scanner: ERROR - Cannot read scanner make & model: > mfnp://192.168.1.154 > [bjnp] sanei_bjnp_find_devices: Added all configured scanners, now do auto > detection... > [bjnp] prepare_socket: lo is not a valid IPv4 interface, skipping... > [bjnp] prepare_socket: eth0 is IPv4 capable, sending broadcast, socket = 3 > [bjnp] prepare_socket: lo is not a valid IPv6 interface, skipping... > [bjnp] prepare_socket: eth0 is IPv6 capable, sending broadcast, socket = 4 > [bjnp] sanei_find_devices: scanner discovery finished... > device `net:localhost:hpaio:/net/Photosmart_3300_series?zc=HP952A54' is a > Hewlett-Packard Photosmart_3300_series all-in-one > device `hpaio:/net/Photosmart_3300_series?zc=HP952A54' is a Hewlett-Packard > Photosmart_3300_series all-in-one > > Does any one have an idea what could be the issue? > > Cheers, > WillyN2 > > -- > sane-devel mailing list: [email protected] > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel > Unsubscribe: Send mail with subject "unsubscribe your_password" > to [email protected] -- sane-devel mailing list: [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to [email protected]
