Hi Troels,
I folowed your advice and I tried it with the "remote scanner" scan type
on, but unfortunately with the same result. Any other thoughts?
Kind regards,
WillyN2
Op 26-02-16 om 23:44 schreef Troels Thomsen:
Did you select "remote scanner" on the front panel of the device?
Otherwise I get the timeouts as well on my mf8230
/Troels
2016-02-26 18:57 GMT+01:00 Wilfred - hotmail <[email protected]>:
Hi All,
I am trying to get my Canon i-sensys MF8350cdn scanner working over my
network, but without luck so far. I have also a HP officejet connect to the
network and that is picked up well.
I get the following output when I run scanimage -L in the debugging mode.
~ $ env SANE_DEBUG_BJNP="5" scanimage -L
[sanei_debug] Setting debug level of bjnp to 5.
[bjnp] sanei_bjnp_find_devices, pixma backend version: 0.17.26
[bjnp] sanei_bjnp_find_devices: Adding scanner from pixma.conf:
mfnp://192.168.1.154
[bjnp] bjnp_allocate_device(mfnp://192.168.1.154) 0
[bjnp] get_scanner_name: Forward lookup for Canon385e6f.Workgroup succeeded,
using as hostname
[bjnp] setup_udp_socket: Setting up a UDP socket, dest: 192.168.1.154 port
8610
[bjnp] udp_command: ERROR - select failed: timed out
[bjnp] udp_command: ERROR - select failed: timed out
[bjnp] udp_command: ERROR - select failed: timed out
[bjnp] udp_command: ERROR - no data received
[bjnp] bjnp_init_device_structure: Cannot read mac address, skipping this
scanner
[bjnp] bjnp_allocate_device: Scanner not yet in our list, added it:
192.168.1.154:8610
[bjnp] get_scanner_id: Get scanner identity
[bjnp] 00000000:4d 46 4e 50 02 30 00 00 00 01 00 00 00 00 00 00
[bjnp] setup_udp_socket: Setting up a UDP socket, dest: 192.168.1.154 port
8610
[bjnp] udp_command: ERROR - select failed: timed out
[bjnp] udp_command: ERROR - select failed: timed out
[bjnp] udp_command: ERROR - select failed: timed out
[bjnp] udp_command: ERROR - no data received
[bjnp] get_scanner_id: ERROR - Failed to retrieve scanner identity:
[bjnp] add_scanner: ERROR - Cannot read scanner make & model:
mfnp://192.168.1.154
[bjnp] sanei_bjnp_find_devices: Added all configured scanners, now do auto
detection...
[bjnp] prepare_socket: lo is not a valid IPv4 interface, skipping...
[bjnp] prepare_socket: eth0 is IPv4 capable, sending broadcast, socket = 3
[bjnp] prepare_socket: lo is not a valid IPv6 interface, skipping...
[bjnp] prepare_socket: eth0 is IPv6 capable, sending broadcast, socket = 4
[bjnp] sanei_find_devices: scanner discovery finished...
device `net:localhost:hpaio:/net/Photosmart_3300_series?zc=HP952A54' is a
Hewlett-Packard Photosmart_3300_series all-in-one
device `hpaio:/net/Photosmart_3300_series?zc=HP952A54' is a Hewlett-Packard
Photosmart_3300_series all-in-one
Does any one have an idea what could be the issue?
Cheers,
WillyN2
--
sane-devel mailing list: [email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
to [email protected]
--
sane-devel mailing list: [email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
to [email protected]
