Dear Ladies and Gentlemen,
sending you the result by "sane-find-scanner" below. The Problem is that
sane does not find the scanner.
It would be great if you can help.
Yours Sincerely
Rolf-Peter Kraft
mailto:[email protected]
sudo sane-find-scanner
[sudo] password for rpk:
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make
sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x0bda [Manufacturer Realtek ], product=0x8174
[RTL8192S WLAN Adapter ]) at libusb:004:003
found USB scanner (vendor=0x04a9 [Canon], product=0x177e [MG6600
series]) at libusb:001:002
# Your USB scanner was (probably) detected. It may or may not be
supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
--
sane-devel mailing list: [email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
to [email protected]
